Ticket #165: 760-dmesg-pit.log

File 760-dmesg-pit.log, 41.6 KB (added by wdc, 15 years ago)

dmesg when clocksource=pit. Oddly, it complains of an hpet problem!

Line 
1[    0.000000] Initializing cgroup subsys cpuset
2[    0.000000] Initializing cgroup subsys cpu
3[    0.000000] Linux version 2.6.27-11-generic (buildd@rothera) (gcc version 4.3.2 (Ubuntu 4.3.2-1ubuntu11) ) #1 SMP Thu Jan 29 19:24:39 UTC 2009 (Ubuntu 2.6.27-11.27-generic)
4[    0.000000] BIOS-provided physical RAM map:
5[    0.000000]  BIOS-e820: 0000000000000000 - 000000000009e400 (usable)
6[    0.000000]  BIOS-e820: 00000000000f0000 - 0000000000100000 (reserved)
7[    0.000000]  BIOS-e820: 0000000000100000 - 00000000cfdffc00 (usable)
8[    0.000000]  BIOS-e820: 00000000cfdffc00 - 00000000cfe53c00 (ACPI NVS)
9[    0.000000]  BIOS-e820: 00000000cfe53c00 - 00000000cfe55c00 (ACPI data)
10[    0.000000]  BIOS-e820: 00000000cfe55c00 - 00000000d0000000 (reserved)
11[    0.000000]  BIOS-e820: 00000000e0000000 - 00000000f0000000 (reserved)
12[    0.000000]  BIOS-e820: 00000000fec00000 - 00000000fed00400 (reserved)
13[    0.000000]  BIOS-e820: 00000000fed20000 - 00000000feda0000 (reserved)
14[    0.000000]  BIOS-e820: 00000000fee00000 - 00000000fef00000 (reserved)
15[    0.000000]  BIOS-e820: 00000000ffb00000 - 0000000100000000 (reserved)
16[    0.000000]  BIOS-e820: 0000000100000000 - 0000000128000000 (usable)
17[    0.000000] DMI 2.5 present.
18[    0.000000] last_pfn = 0xcfdff max_arch_pfn = 0x100000
19[    0.000000] kernel direct mapping tables up to 38000000 @ 7000-c000
20[    0.000000] RAMDISK: 377a4000 - 37fefaf5
21[    0.000000] ACPI: RSDP 000FEC00, 0024 (r2 DELL  )
22[    0.000000] ACPI: XSDT 000FC7EF, 008C (r1 DELL    B10K          15 ASL        61)
23[    0.000000] ACPI: FACP 000FC91F, 00F4 (r3 DELL    B10K          15 ASL        61)
24[    0.000000] ACPI: DSDT FFF1BE4B, 536F (r1   DELL    dt_ex     1000 INTL 20050624)
25[    0.000000] ACPI: FACS CFDFFC00, 0040
26[    0.000000] ACPI: SSDT FFF212D9, 00AA (r1   DELL    st_ex     1000 INTL 20050624)
27[    0.000000] ACPI: APIC 000FCA13, 0092 (r1 DELL    B10K          15 ASL        61)
28[    0.000000] ACPI: BOOT 000FCAA5, 0028 (r1 DELL    B10K          15 ASL        61)
29[    0.000000] ACPI: ASF! 000FCACD, 0096 (r32 DELL    B10K          15 ASL        61)
30[    0.000000] ACPI: MCFG 000FCB63, 003E (r1 DELL    B10K          15 ASL        61)
31[    0.000000] ACPI: HPET 000FCBA1, 0038 (r1 DELL    B10K          15 ASL        61)
32[    0.000000] ACPI: TCPA 000FCDFD, 0032 (r1 DELL    B10K          15 ASL        61)
33[    0.000000] ACPI: ____ 000FCE2F, 0030 (r1 DELL    B10K          15 ASL        61)
34[    0.000000] ACPI: SLIC 000FCBD9, 0176 (r1 DELL    B10K          15 ASL        61)
35[    0.000000] ACPI: SSDT CFDFFC40, 01F9 (r1 DpgPmm  Cpu0Ist       11 INTL 20050624)
36[    0.000000] ACPI: SSDT CFE00049, 01F9 (r1 DpgPmm  Cpu1Ist       11 INTL 20050624)
37[    0.000000] ACPI: SSDT CFE00452, 0190 (r1 DpgPmm    CpuPm       10 INTL 20050624)
38[    0.000000] 2429MB HIGHMEM available.
39[    0.000000] 896MB LOWMEM available.
40[    0.000000]   mapped low ram: 0 - 38000000
41[    0.000000]   low ram: 00000000 - 38000000
42[    0.000000]   bootmap 00008000 - 0000f000
43[    0.000000] (9 early reservations) ==> bootmem [0000000000 - 0038000000]
44[    0.000000]   #0 [0000000000 - 0000001000]   BIOS data page ==> [0000000000 - 0000001000]
45[    0.000000]   #1 [0000001000 - 0000002000]    EX TRAMPOLINE ==> [0000001000 - 0000002000]
46[    0.000000]   #2 [0000006000 - 0000007000]       TRAMPOLINE ==> [0000006000 - 0000007000]
47[    0.000000]   #3 [0000100000 - 00005c29e0]    TEXT DATA BSS ==> [0000100000 - 00005c29e0]
48[    0.000000]   #4 [00377a4000 - 0037fefaf5]          RAMDISK ==> [00377a4000 - 0037fefaf5]
49[    0.000000]   #5 [00005c3000 - 00005c6000]    INIT_PG_TABLE ==> [00005c3000 - 00005c6000]
50[    0.000000]   #6 [000009e400 - 0000100000]    BIOS reserved ==> [000009e400 - 0000100000]
51[    0.000000]   #7 [0000007000 - 0000008000]          PGTABLE ==> [0000007000 - 0000008000]
52[    0.000000]   #8 [0000008000 - 000000f000]          BOOTMAP ==> [0000008000 - 000000f000]
53[    0.000000] found SMP MP-table at [c00fe710] 000fe710
54[    0.000000] Zone PFN ranges:
55[    0.000000]   DMA      0x00000000 -> 0x00001000
56[    0.000000]   Normal   0x00001000 -> 0x00038000
57[    0.000000]   HighMem  0x00038000 -> 0x000cfdff
58[    0.000000] Movable zone start PFN for each node
59[    0.000000] early_node_map[2] active PFN ranges
60[    0.000000]     0: 0x00000000 -> 0x0000009e
61[    0.000000]     0: 0x00000100 -> 0x000cfdff
62[    0.000000] On node 0 totalpages: 851357
63[    0.000000] free_area_init_node: node 0, pgdat c048c680, node_mem_map c1000000
64[    0.000000]   DMA zone: 3962 pages, LIFO batch:0
65[    0.000000]   Normal zone: 223300 pages, LIFO batch:31
66[    0.000000]   HighMem zone: 616611 pages, LIFO batch:31
67[    0.000000] ACPI: PM-Timer IO Port: 0x808
68[    0.000000] ACPI: Local APIC address 0xfee00000
69[    0.000000] ACPI: LAPIC (acpi_id[0x01] lapic_id[0x00] enabled)
70[    0.000000] ACPI: LAPIC (acpi_id[0x02] lapic_id[0x01] enabled)
71[    0.000000] ACPI: LAPIC (acpi_id[0x03] lapic_id[0x05] disabled)
72[    0.000000] ACPI: LAPIC (acpi_id[0x04] lapic_id[0x07] disabled)
73[    0.000000] ACPI: LAPIC (acpi_id[0x05] lapic_id[0x00] disabled)
74[    0.000000] ACPI: LAPIC (acpi_id[0x06] lapic_id[0x01] disabled)
75[    0.000000] ACPI: LAPIC (acpi_id[0x07] lapic_id[0x02] disabled)
76[    0.000000] ACPI: LAPIC (acpi_id[0x08] lapic_id[0x03] disabled)
77[    0.000000] ACPI: LAPIC_NMI (acpi_id[0xff] high level lint[0x1])
78[    0.000000] ACPI: IOAPIC (id[0x08] address[0xfec00000] gsi_base[0])
79[    0.000000] IOAPIC[0]: apic_id 8, version 32, address 0xfec00000, GSI 0-23
80[    0.000000] ACPI: INT_SRC_OVR (bus 0 bus_irq 0 global_irq 2 dfl dfl)
81[    0.000000] ACPI: INT_SRC_OVR (bus 0 bus_irq 9 global_irq 9 high level)
82[    0.000000] ACPI: IRQ0 used by override.
83[    0.000000] ACPI: IRQ2 used by override.
84[    0.000000] ACPI: IRQ9 used by override.
85[    0.000000] Enabling APIC mode:  Flat.  Using 1 I/O APICs
86[    0.000000] ACPI: HPET id: 0x8086a701 base: 0xfed00000
87[    0.000000] Using ACPI (MADT) for SMP configuration information
88[    0.000000] SMP: Allowing 8 CPUs, 6 hotplug CPUs
89[    0.000000] mapped APIC to ffffb000 (fee00000)
90[    0.000000] mapped IOAPIC to ffffa000 (fec00000)
91[    0.000000] PM: Registered nosave memory: 000000000009e000 - 00000000000f0000
92[    0.000000] PM: Registered nosave memory: 00000000000f0000 - 0000000000100000
93[    0.000000] Allocating PCI resources starting at d1000000 (gap: d0000000:10000000)
94[    0.000000] PERCPU: Allocating 41628 bytes of per cpu data
95[    0.000000] NR_CPUS: 64, nr_cpu_ids: 8, nr_node_ids 1
96[    0.000000] Built 1 zonelists in Zone order, mobility grouping on.  Total pages: 843873
97[    0.000000] Kernel command line: root=/dev/mapper/athena10-root ro nosplash clocksource=pit
98[    0.000000] Enabling fast FPU save and restore... done.
99[    0.000000] Enabling unmasked SIMD FPU exception support... done.
100[    0.000000] Initializing CPU#0
101[    0.000000] PID hash table entries: 4096 (order: 12, 16384 bytes)
102[    0.000000] TSC: PIT calibration confirmed by PMTIMER.
103[    0.000000] TSC: using PIT calibration value
104[    0.000000] Detected 2992.478 MHz processor.
105[    0.004000] Console: colour VGA+ 80x25
106[    0.004000] console [tty0] enabled
107[    0.004000] Dentry cache hash table entries: 131072 (order: 7, 524288 bytes)
108[    0.004000] Inode-cache hash table entries: 65536 (order: 6, 262144 bytes)
109[    0.004000] Memory: 3360068k/3405820k available (2576k kernel code, 44572k reserved, 1165k data, 424k init, 2488316k highmem)
110[    0.004000] virtual kernel memory layout:
111[    0.004000]     fixmap  : 0xffc77000 - 0xfffff000   (3616 kB)
112[    0.004000]     pkmap   : 0xff400000 - 0xff800000   (4096 kB)
113[    0.004000]     vmalloc : 0xf8800000 - 0xff3fe000   ( 107 MB)
114[    0.004000]     lowmem  : 0xc0000000 - 0xf8000000   ( 896 MB)
115[    0.004000]       .init : 0xc04ad000 - 0xc0517000   ( 424 kB)
116[    0.004000]       .data : 0xc03840da - 0xc04a7680   (1165 kB)
117[    0.004000]       .text : 0xc0100000 - 0xc03840da   (2576 kB)
118[    0.004000] Checking if this processor honours the WP bit even in supervisor mode...Ok.
119[    0.004000] CPA: page pool initialized 1 of 1 pages preallocated
120[    0.004000] SLUB: Genslabs=12, HWalign=64, Order=0-3, MinObjects=0, CPUs=8, Nodes=1
121[    0.004000] hpet clockevent registered
122[    0.004000] Calibrating delay loop (skipped), value calculated using timer frequency.. 5984.95 BogoMIPS (lpj=11969912)
123[    0.004000] Security Framework initialized
124[    0.004000] SELinux:  Disabled at boot.
125[    0.004000] AppArmor: AppArmor initialized
126[    0.004000] Mount-cache hash table entries: 512
127[    0.004000] Initializing cgroup subsys ns
128[    0.004000] Initializing cgroup subsys cpuacct
129[    0.004000] Initializing cgroup subsys memory
130[    0.004000] CPU: L1 I cache: 32K, L1 D cache: 32K
131[    0.004000] CPU: L2 cache: 6144K
132[    0.004000] CPU: Physical Processor ID: 0
133[    0.004000] CPU: Processor Core ID: 0
134[    0.004000] using mwait in idle threads.
135[    0.004000] Checking 'hlt' instruction... OK.
136[    0.017421] ACPI: Core revision 20080609
137[    0.106655] ACPI: Checking initramfs for custom DSDT
138[    0.486059] ENABLING IO-APIC IRQs
139[    0.486256] ..TIMER: vector=0x31 apic1=0 pin1=2 apic2=-1 pin2=-1
140[    0.525974] CPU0: Intel(R) Core(TM)2 Duo CPU     E8400  @ 3.00GHz stepping 0a
141[    0.528031] Booting processor 1/1 ip 6000
142[    0.004000] Initializing CPU#1
143[    0.004000] Calibrating delay using timer specific routine.. 5984.96 BogoMIPS (lpj=11969937)
144[    0.004000] CPU: L1 I cache: 32K, L1 D cache: 32K
145[    0.004000] CPU: L2 cache: 6144K
146[    0.004000] CPU: Physical Processor ID: 0
147[    0.004000] CPU: Processor Core ID: 1
148[    0.612755] CPU1: Intel(R) Core(TM)2 Duo CPU     E8400  @ 3.00GHz stepping 0a
149[    0.613015] checking TSC synchronization [CPU#0 -> CPU#1]: passed.
150[    0.616046] Brought up 2 CPUs
151[    0.616077] Total of 2 processors activated (11969.92 BogoMIPS).
152[    0.616123] CPU0 attaching sched-domain:
153[    0.616125]  domain 0: span 0-1 level MC
154[    0.616127]   groups: 0 1
155[    0.616131] CPU1 attaching sched-domain:
156[    0.616133]  domain 0: span 0-1 level MC
157[    0.616134]   groups: 1 0
158[    0.616187] net_namespace: 840 bytes
159[    0.616187] Booting paravirtualized kernel on bare hardware
160[    0.616269] Time: 18:39:35  Date: 03/26/09
161[    0.616316] NET: Registered protocol family 16
162[    0.616357] EISA bus registered
163[    0.616357] ACPI FADT declares the system doesn't support PCIe ASPM, so disable it
164[    0.616357] ACPI: bus type pci registered
165[    0.616357] PCI: MCFG configuration 0: base e0000000 segment 0 buses 0 - 255
166[    0.616357] PCI: MCFG area at e0000000 reserved in E820
167[    0.616357] PCI: Using MMCONFIG for extended config space
168[    0.616357] PCI: Using configuration type 1 for base access
169[    0.616486] ACPI: EC: Look up EC in DSDT
170[    0.672516] ACPI: BIOS _OSI(Linux) query ignored
171[    0.672547] ACPI: If "acpi_osi=Linux" works better, please notify linux-acpi@vger.kernel.org
172[    0.697773] ACPI: Interpreter enabled
173[    0.697803] ACPI: (supports S0 S1 S3 S4 S5)
174[    0.697955] ACPI: Using IOAPIC for interrupt routing
175[    0.792419] ACPI: PCI Root Bridge [PCI0] (0000:00)
176[    0.792419] pci 0000:00:01.0: PME# supported from D0 D3hot D3cold
177[    0.792419] pci 0000:00:01.0: PME# disabled
178[    0.792419] PCI: 0000:00:03.0 reg 10 64bit mmio: [feda6000, feda600f]
179[    0.792419] pci 0000:00:03.0: PME# supported from D0 D3hot D3cold
180[    0.792419] pci 0000:00:03.0: PME# disabled
181[    0.792419] PCI: 0000:00:03.2 reg 10 io port: [fe80, fe87]
182[    0.792419] PCI: 0000:00:03.2 reg 14 io port: [fe90, fe93]
183[    0.792419] PCI: 0000:00:03.2 reg 18 io port: [fea0, fea7]
184[    0.792419] PCI: 0000:00:03.2 reg 1c io port: [feb0, feb3]
185[    0.792419] PCI: 0000:00:03.2 reg 20 io port: [fef0, feff]
186[    0.792419] PCI: 0000:00:03.3 reg 10 io port: [ec98, ec9f]
187[    0.792419] PCI: 0000:00:03.3 reg 14 32bit mmio: [febd8000, febd8fff]
188[    0.792436] PCI: 0000:00:19.0 reg 10 32bit mmio: [febe0000, febfffff]
189[    0.792441] PCI: 0000:00:19.0 reg 14 32bit mmio: [febd9000, febd9fff]
190[    0.792445] PCI: 0000:00:19.0 reg 18 io port: [ecc0, ecdf]
191[    0.792471] pci 0000:00:19.0: PME# supported from D0 D3hot D3cold
192[    0.792501] pci 0000:00:19.0: PME# disabled
193[    0.792561] PCI: 0000:00:1a.0 reg 20 io port: [ff20, ff3f]
194[    0.792610] PCI: 0000:00:1a.1 reg 20 io port: [ff00, ff1f]
195[    0.792659] PCI: 0000:00:1a.2 reg 20 io port: [fc00, fc1f]
196[    0.792710] PCI: 0000:00:1a.7 reg 10 32bit mmio: [febda000, febda3ff]
197[    0.792748] pci 0000:00:1a.7: PME# supported from D0 D3hot D3cold
198[    0.792779] pci 0000:00:1a.7: PME# disabled
199[    0.792831] PCI: 0000:00:1b.0 reg 10 64bit mmio: [febdc000, febdffff]
200[    0.792859] pci 0000:00:1b.0: PME# supported from D0 D3hot D3cold
201[    0.792890] pci 0000:00:1b.0: PME# disabled
202[    0.792952] pci 0000:00:1c.0: PME# supported from D0 D3hot D3cold
203[    0.792983] pci 0000:00:1c.0: PME# disabled
204[    0.793046] pci 0000:00:1c.1: PME# supported from D0 D3hot D3cold
205[    0.793729] pci 0000:00:1c.1: PME# disabled
206[    0.793793] PCI: 0000:00:1d.0 reg 20 io port: [ff80, ff9f]
207[    0.793842] PCI: 0000:00:1d.1 reg 20 io port: [ff60, ff7f]
208[    0.793893] PCI: 0000:00:1d.2 reg 20 io port: [ff40, ff5f]
209[    0.793944] PCI: 0000:00:1d.7 reg 10 32bit mmio: [ff980000, ff9803ff]
210[    0.793982] pci 0000:00:1d.7: PME# supported from D0 D3hot D3cold
211[    0.794014] pci 0000:00:1d.7: PME# disabled
212[    0.796151] PCI: 0000:00:1f.2 reg 10 io port: [fe00, fe07]
213[    0.796155] PCI: 0000:00:1f.2 reg 14 io port: [fe10, fe13]
214[    0.796160] PCI: 0000:00:1f.2 reg 18 io port: [fe20, fe27]
215[    0.796164] PCI: 0000:00:1f.2 reg 1c io port: [fe30, fe33]
216[    0.796168] PCI: 0000:00:1f.2 reg 20 io port: [fec0, fedf]
217[    0.796172] PCI: 0000:00:1f.2 reg 24 32bit mmio: [ff970000, ff9707ff]
218[    0.796190] pci 0000:00:1f.2: PME# supported from D3hot
219[    0.796220] pci 0000:00:1f.2: PME# disabled
220[    0.796262] PCI: 0000:00:1f.3 reg 10 64bit mmio: [febdb000, febdb0ff]
221[    0.796272] PCI: 0000:00:1f.3 reg 20 io port: [ece0, ecff]
222[    0.796306] PCI: 0000:01:00.0 reg 10 64bit mmio: [d0000000, dfffffff]
223[    0.796313] PCI: 0000:01:00.0 reg 18 64bit mmio: [fe9f0000, fe9fffff]
224[    0.796317] PCI: 0000:01:00.0 reg 20 io port: [dc00, dcff]
225[    0.796324] PCI: 0000:01:00.0 reg 30 32bit mmio: [fea00000, fea1ffff]
226[    0.796335] pci 0000:01:00.0: supports D1
227[    0.796337] pci 0000:01:00.0: supports D2
228[    0.796362] PCI: bridge 0000:00:01.0 io port: [d000, dfff]
229[    0.796364] PCI: bridge 0000:00:01.0 32bit mmio: [fe900000, feafffff]
230[    0.796367] PCI: bridge 0000:00:01.0 64bit mmio pref: [d0000000, dfffffff]
231[    0.796398] PCI: bridge 0000:00:1c.0 32bit mmio: [fe800000, fe8fffff]
232[    0.796434] PCI: bridge 0000:00:1c.1 32bit mmio: [fe700000, fe7fffff]
233[    0.796475] pci 0000:00:1e.0: transparent bridge
234[    0.796521] bus 00 -> node 0
235[    0.796526] ACPI: PCI Interrupt Routing Table [\_SB_.PCI0._PRT]
236[    0.797280] ACPI: PCI Interrupt Routing Table [\_SB_.PCI0.PCI4._PRT]
237[    0.797826] ACPI: PCI Interrupt Routing Table [\_SB_.PCI0.PCI2._PRT]
238[    0.798244] ACPI: PCI Interrupt Routing Table [\_SB_.PCI0.PCI3._PRT]
239[    0.798704] ACPI: PCI Interrupt Routing Table [\_SB_.PCI0.PCI1._PRT]
240[    2.055134] ACPI: PCI Interrupt Link [LNKA] (IRQs 3 4 5 6 7 9 10 *11 12 15)
241[    2.056907] ACPI: PCI Interrupt Link [LNKB] (IRQs 3 4 *5 6 7 9 10 11 12 15)
242[    2.057949] ACPI: PCI Interrupt Link [LNKC] (IRQs 3 4 5 6 7 *9 10 11 12 15)
243[    2.058993] ACPI: PCI Interrupt Link [LNKD] (IRQs 3 4 5 6 7 9 *10 11 12 15)
244[    2.060064] ACPI: PCI Interrupt Link [LNKE] (IRQs 3 4 5 6 7 9 10 11 12 15) *0, disabled.
245[    2.061157] ACPI: PCI Interrupt Link [LNKF] (IRQs *3 4 5 6 7 9 10 11 12 15)
246[    2.062218] ACPI: PCI Interrupt Link [LNKG] (IRQs 3 4 *5 6 7 9 10 11 12 15)
247[    2.063262] ACPI: PCI Interrupt Link [LNKH] (IRQs 3 4 5 6 7 9 *10 11 12 15)
248[    2.063763] ACPI Warning (tbutils-0217): Incorrect checksum in table [TCPA] - 00, should be 7F [20080609]
249[    2.064065] Linux Plug and Play Support v0.97 (c) Adam Belay
250[    2.064099] pnp: PnP ACPI init
251[    2.064099] ACPI: bus type pnp registered
252[    2.109961] pnp: PnP ACPI: found 9 devices
253[    2.109961] ACPI: ACPI bus type pnp unregistered
254[    2.109961] PnPBIOS: Disabled by ACPI PNP
255[    2.109961] PCI: Using ACPI for IRQ routing
256[    2.116039] NET: Registered protocol family 8
257[    2.116071] NET: Registered protocol family 20
258[    2.116116] NetLabel: Initializing
259[    2.116116] NetLabel:  domain hash size = 128
260[    2.116116] NetLabel:  protocols = UNLABELED CIPSOv4
261[    2.116150] NetLabel:  unlabeled traffic allowed by default
262[    2.116184] hpet0: at MMIO 0xfed00000, IRQs 2, 8, 0, 0, 0, 0, 0, 0
263[    2.116421] hpet0: 8 64-bit timers, 14318180 Hz
264[    2.118652] tracer: 772 pages allocated for 65536 entries of 48 bytes
265[    2.118682]    actual entries 65620
266[    2.118755] AppArmor: AppArmor Filesystem Enabled
267[    2.118793] ACPI: RTC can wake from S4
268[    2.120037] Switched to high resolution mode on CPU 0
269[    2.121077] Switched to high resolution mode on CPU 1
270[    2.124013] system 00:01: ioport range 0x800-0x85f has been reserved
271[    2.124046] system 00:01: ioport range 0xc00-0xc7f has been reserved
272[    2.124079] system 00:01: ioport range 0x860-0x8ff has been reserved
273[    2.158971] pci 0000:00:01.0: PCI bridge, secondary bus 0000:01
274[    2.159002] pci 0000:00:01.0:   IO window: 0xd000-0xdfff
275[    2.159032] pci 0000:00:01.0:   MEM window: 0xfe900000-0xfeafffff
276[    2.159062] pci 0000:00:01.0:   PREFETCH window: 0x000000d0000000-0x000000dfffffff
277[    2.159097] pci 0000:00:1c.0: PCI bridge, secondary bus 0000:02
278[    2.159126] pci 0000:00:1c.0:   IO window: disabled
279[    2.159157] pci 0000:00:1c.0:   MEM window: 0xfe800000-0xfe8fffff
280[    2.159187] pci 0000:00:1c.0:   PREFETCH window: disabled
281[    2.159219] pci 0000:00:1c.1: PCI bridge, secondary bus 0000:03
282[    2.159248] pci 0000:00:1c.1:   IO window: disabled
283[    2.159279] pci 0000:00:1c.1:   MEM window: 0xfe700000-0xfe7fffff
284[    2.159310] pci 0000:00:1c.1:   PREFETCH window: disabled
285[    2.159342] pci 0000:00:1e.0: PCI bridge, secondary bus 0000:04
286[    2.159371] pci 0000:00:1e.0:   IO window: disabled
287[    2.159402] pci 0000:00:1e.0:   MEM window: disabled
288[    2.159432] pci 0000:00:1e.0:   PREFETCH window: disabled
289[    2.159468] pci 0000:00:01.0: PCI INT A -> GSI 16 (level, low) -> IRQ 16
290[    2.159499] pci 0000:00:01.0: setting latency timer to 64
291[    2.159504] pci 0000:00:1c.0: PCI INT A -> GSI 16 (level, low) -> IRQ 16
292[    2.159535] pci 0000:00:1c.0: setting latency timer to 64
293[    2.159541] pci 0000:00:1c.1: PCI INT B -> GSI 17 (level, low) -> IRQ 17
294[    2.159572] pci 0000:00:1c.1: setting latency timer to 64
295[    2.159576] pci 0000:00:1e.0: setting latency timer to 64
296[    2.159579] bus: 00 index 0 io port: [0, ffff]
297[    2.159607] bus: 00 index 1 mmio: [0, ffffffff]
298[    2.159636] bus: 01 index 0 io port: [d000, dfff]
299[    2.159665] bus: 01 index 1 mmio: [fe900000, feafffff]
300[    2.159693] bus: 01 index 2 mmio: [d0000000, dfffffff]
301[    2.159722] bus: 01 index 3 mmio: [0, 0]
302[    2.159751] bus: 02 index 0 mmio: [0, 0]
303[    2.159779] bus: 02 index 1 mmio: [fe800000, fe8fffff]
304[    2.159807] bus: 02 index 2 mmio: [0, 0]
305[    2.159836] bus: 02 index 3 mmio: [0, 0]
306[    2.159864] bus: 03 index 0 mmio: [0, 0]
307[    2.159892] bus: 03 index 1 mmio: [fe700000, fe7fffff]
308[    2.159921] bus: 03 index 2 mmio: [0, 0]
309[    2.159949] bus: 03 index 3 mmio: [0, 0]
310[    2.159977] bus: 04 index 0 mmio: [0, 0]
311[    2.160010] bus: 04 index 1 mmio: [0, 0]
312[    2.160038] bus: 04 index 2 mmio: [0, 0]
313[    2.160066] bus: 04 index 3 io port: [0, ffff]
314[    2.160094] bus: 04 index 4 mmio: [0, ffffffff]
315[    2.160127] NET: Registered protocol family 2
316[    2.172050] IP route cache hash table entries: 32768 (order: 5, 131072 bytes)
317[    2.172251] TCP established hash table entries: 131072 (order: 8, 1048576 bytes)
318[    2.172483] TCP bind hash table entries: 65536 (order: 7, 524288 bytes)
319[    2.172612] TCP: Hash tables configured (established 131072 bind 65536)
320[    2.172642] TCP reno registered
321[    2.180074] NET: Registered protocol family 1
322[    2.180192] checking if image is initramfs... it is
323[    2.662521] Freeing initrd memory: 8494k freed
324[    2.662673] Simple Boot Flag at 0x7a set to 0x1
325[    2.663307] audit: initializing netlink socket (disabled)
326[    2.663352] type=2000 audit(1238092776.660:1): initialized
327[    2.667429] highmem bounce pool size: 64 pages
328[    2.667460] HugeTLB registered 4 MB page size, pre-allocated 0 pages
329[    2.668952] VFS: Disk quotas dquot_6.5.1
330[    2.669030] Dquot-cache hash table entries: 1024 (order 0, 4096 bytes)
331[    2.669123] msgmni has been set to 1720
332[    2.669227] io scheduler noop registered
333[    2.669256] io scheduler anticipatory registered
334[    2.669285] io scheduler deadline registered
335[    2.669320] io scheduler cfq registered (default)
336[    2.669462] pci 0000:01:00.0: Boot video device
337[    2.669531] pcieport-driver 0000:00:01.0: setting latency timer to 64
338[    2.669553] pcieport-driver 0000:00:01.0: found MSI capability
339[    2.669600] pci_express 0000:00:01.0:pcie00: allocate port service
340[    2.669625] pci_express 0000:00:01.0:pcie03: allocate port service
341[    2.669677] pcieport-driver 0000:00:1c.0: setting latency timer to 64
342[    2.669701] pcieport-driver 0000:00:1c.0: found MSI capability
343[    2.669754] pci_express 0000:00:1c.0:pcie00: allocate port service
344[    2.669778] pci_express 0000:00:1c.0:pcie02: allocate port service
345[    2.669800] pci_express 0000:00:1c.0:pcie03: allocate port service
346[    2.669857] pcieport-driver 0000:00:1c.1: setting latency timer to 64
347[    2.669882] pcieport-driver 0000:00:1c.1: found MSI capability
348[    2.669934] pci_express 0000:00:1c.1:pcie00: allocate port service
349[    2.669957] pci_express 0000:00:1c.1:pcie02: allocate port service
350[    2.669981] pci_express 0000:00:1c.1:pcie03: allocate port service
351[    2.670173] isapnp: Scanning for PnP cards...
352[    3.022852] isapnp: No Plug & Play device found
353[    3.042366] hpet_resources: 0xfed00000 is busy
354[    3.042395] Serial: 8250/16550 driver4 ports, IRQ sharing enabled
355[    3.042522] serial8250: ttyS0 at I/O 0x3f8 (irq = 4) is a 16550A
356[    3.042982] 00:07: ttyS0 at I/O 0x3f8 (irq = 4) is a 16550A
357[    3.043096] serial 0000:00:03.3: PCI INT B -> GSI 17 (level, low) -> IRQ 17
358[    3.043224] 0000:00:03.3: ttyS1 at I/O 0xec98 (irq = 17) is a 16550A
359[    3.044224] brd: module loaded
360[    3.044293] input: Macintosh mouse button emulation as /devices/virtual/input/input0
361[    3.044424] PNP: No PS/2 controller found. Probing ports directly.
362[    3.046962] serio: i8042 KBD port at 0x60,0x64 irq 1
363[    3.046994] serio: i8042 AUX port at 0x60,0x64 irq 12
364[    3.047164] mice: PS/2 mouse device common for all mice
365[    3.047267] rtc_cmos 00:05: rtc core: registered rtc_cmos as rtc0
366[    3.047313] rtc0: alarms up to one day, hpet irqs
367[    3.047408] EISA: Probing bus 0 at eisa.0
368[    3.047456] EISA: Detected 0 cards.
369[    3.047485] cpuidle: using governor ladder
370[    3.047515] cpuidle: using governor menu
371[    3.047862] TCP cubic registered
372[    3.047910] Using IPI No-Shortcut mode
373[    3.048037] registered taskstats version 1
374[    3.048160]   Magic number: 1:976:696
375[    3.048226] rtc_cmos 00:05: setting system clock to 2009-03-26 18:39:38 UTC (1238092778)
376[    3.048265] BIOS EDD facility v0.16 2004-Jun-25, 0 devices found
377[    3.048295] EDD information not available.
378[    3.048465] Freeing unused kernel memory: 424k freed
379[    3.048517] Write protecting the kernel text: 2580k
380[    3.048562] Write protecting the kernel read-only data: 940k
381[    3.121096] fuse init (API version 7.9)
382[    3.137283] Monitor-Mwait will be used to enter C-1 state
383[    3.137396] ACPI: CPU0 (power states: C1[C1] C2[C2] C3[C3])
384[    3.137550] processor ACPI0007:00: registered as cooling_device0
385[    3.139252] ------------[ cut here ]------------
386[    3.139282] WARNING: at /build/buildd/linux-2.6.27/arch/x86/kernel/hpet.c:286 hpet_legacy_next_event+0x67/0x80()
387[    3.139316] Modules linked in: processor(+) fan fbcon tileblit font bitblit softcursor fuse
388[    3.139557] Pid: 0, comm: swapper Not tainted 2.6.27-11-generic #1
389[    3.139587]  [<c037d236>] ? printk+0x1d/0x1f
390[    3.139662]  [<c0131e99>] warn_on_slowpath+0x59/0x90
391[    3.139716]  [<c01505b2>] ? clocksource_get_next+0x42/0x50
392[    3.139792]  [<c014f132>] ? update_wall_time+0x442/0x890
393[    3.139868]  [<c014e6eb>] ? getnstimeofday+0x4b/0x100
394[    3.139944]  [<c0136a26>] ? set_normalized_timespec+0x16/0x90
395[    3.140021]  [<c014d305>] ? sched_clock_cpu+0xd5/0x170
396[    3.140098]  [<c037edde>] ? account_scheduler_latency+0xe/0x220
397[    3.140174]  [<c014e6eb>] ? getnstimeofday+0x4b/0x100
398[    3.140249]  [<c01196a7>] hpet_legacy_next_event+0x67/0x80
399[    3.140304]  [<c0151dbf>] clockevents_program_event+0x9f/0x150
400[    3.140357]  [<c01531bb>] tick_dev_program_event+0x3b/0xc0
401[    3.140410]  [<c01529d5>] tick_broadcast_oneshot_control+0x115/0x120
402[    3.140464]  [<c015255f>] tick_notify+0xdf/0x1c0
403[    3.140516]  [<c0381e25>] notifier_call_chain+0x35/0x70
404[    3.140570]  [<c014c41f>] raw_notifier_call_chain+0x1f/0x30
405[    3.140623]  [<c0151bf6>] clockevents_notify+0x26/0x80
406[    3.140675]  [<f88542d7>] acpi_state_timer_broadcast+0x36/0x39 [processor]
407[    3.140733]  [<f88548eb>] acpi_idle_enter_simple+0x9c/0x193 [processor]
408[    3.140789]  [<c02dcc2b>] cpuidle_idle_call+0x7b/0xd0
409[    3.140843]  [<c010288d>] cpu_idle+0x7d/0x140
410[    3.140897]  [<c036fbe3>] rest_init+0x53/0x60
411[    3.140949]  =======================
412[    3.140979] ---[ end trace a9754061bfc19a45 ]---
413[    3.141012] Marking TSC unstable due to TSC halts in idle
414[    3.141126] ACPI: CPU1 (power states: C1[C1] C2[C2] C3[C3])
415[    3.141274] processor ACPI0007:01: registered as cooling_device1
416[    3.152318] device-mapper: uevent: version 1.0.3
417[    3.152465] device-mapper: ioctl: 4.14.0-ioctl (2008-04-23) initialised: dm-devel@redhat.com
418[    3.285379] No dock devices found.
419[    3.300247] SCSI subsystem initialized
420[    3.331492] libata version 3.00 loaded.
421[    3.331525] usbcore: registered new interface driver usbfs
422[    3.331569] usbcore: registered new interface driver hub
423[    3.331623] usbcore: registered new device driver usb
424[    3.331697] e1000e: Intel(R) PRO/1000 Network Driver - 0.3.3.3-k6
425[    3.331727] e1000e: Copyright (c) 1999-2008 Intel Corporation.
426[    3.331785] e1000e 0000:00:19.0: PCI INT A -> GSI 21 (level, low) -> IRQ 21
427[    3.331820] e1000e 0000:00:19.0: setting latency timer to 64
428[    3.341848] USB Universal Host Controller Interface driver v3.0
429[    3.422356] 0000:00:19.0: eth0: (PCI Express:2.5GB/s:Width x1) 00:23:ae:6b:e7:cc
430[    3.422392] 0000:00:19.0: eth0: Intel(R) PRO/1000 Network Connection
431[    3.422440] 0000:00:19.0: eth0: MAC: 5, PHY: 8, PBA No: 8021ff-0ff
432[    3.422514] pata_acpi 0000:00:03.2: PCI INT C -> GSI 18 (level, low) -> IRQ 18
433[    3.422565] pata_acpi 0000:00:03.2: setting latency timer to 64
434[    3.422572] pata_acpi 0000:00:03.2: PCI INT C disabled
435[    3.422634] uhci_hcd 0000:00:1a.0: PCI INT A -> GSI 16 (level, low) -> IRQ 16
436[    3.422667] uhci_hcd 0000:00:1a.0: setting latency timer to 64
437[    3.422670] uhci_hcd 0000:00:1a.0: UHCI Host Controller
438[    3.422724] uhci_hcd 0000:00:1a.0: new USB bus registered, assigned bus number 1
439[    3.422780] uhci_hcd 0000:00:1a.0: irq 16, io base 0x0000ff20
440[    3.422904] usb usb1: configuration #1 chosen from 1 choice
441[    3.422950] hub 1-0:1.0: USB hub found
442[    3.422981] hub 1-0:1.0: 2 ports detected
443[    3.524168] uhci_hcd 0000:00:1a.1: PCI INT B -> GSI 17 (level, low) -> IRQ 17
444[    3.524205] uhci_hcd 0000:00:1a.1: setting latency timer to 64
445[    3.524208] uhci_hcd 0000:00:1a.1: UHCI Host Controller
446[    3.524252] uhci_hcd 0000:00:1a.1: new USB bus registered, assigned bus number 2
447[    3.524309] uhci_hcd 0000:00:1a.1: irq 17, io base 0x0000ff00
448[    3.524392] usb usb2: configuration #1 chosen from 1 choice
449[    3.524438] hub 2-0:1.0: USB hub found
450[    3.524468] hub 2-0:1.0: 2 ports detected
451[    3.732220] uhci_hcd 0000:00:1a.2: PCI INT C -> GSI 22 (level, low) -> IRQ 22
452[    3.732262] uhci_hcd 0000:00:1a.2: setting latency timer to 64
453[    3.732264] uhci_hcd 0000:00:1a.2: UHCI Host Controller
454[    3.732306] uhci_hcd 0000:00:1a.2: new USB bus registered, assigned bus number 3
455[    3.732359] uhci_hcd 0000:00:1a.2: irq 22, io base 0x0000fc00
456[    3.732441] usb usb3: configuration #1 chosen from 1 choice
457[    3.732489] hub 3-0:1.0: USB hub found
458[    3.732519] hub 3-0:1.0: 2 ports detected
459[    3.836204] ehci_hcd 0000:00:1a.7: PCI INT C -> GSI 22 (level, low) -> IRQ 22
460[    3.836250] ehci_hcd 0000:00:1a.7: setting latency timer to 64
461[    3.836252] ehci_hcd 0000:00:1a.7: EHCI Host Controller
462[    3.836296] ehci_hcd 0000:00:1a.7: new USB bus registered, assigned bus number 4
463[    3.840230] ehci_hcd 0000:00:1a.7: debug port 1
464[    3.840263] ehci_hcd 0000:00:1a.7: cache line size of 32 is not supported
465[    3.840267] ehci_hcd 0000:00:1a.7: irq 22, io mem 0xfebda000
466[    3.844194] usb 2-1: new low speed USB device using uhci_hcd and address 2
467[    3.856080] ehci_hcd 0000:00:1a.7: USB 2.0 started, EHCI 1.00, driver 10 Dec 2004
468[    3.856181] usb usb4: configuration #1 chosen from 1 choice
469[    3.856236] hub 4-0:1.0: USB hub found
470[    3.856267] hub 4-0:1.0: 6 ports detected
471[    3.912113] hub 2-0:1.0: unable to enumerate USB device on port 1
472[    4.000084] Clocksource tsc unstable (delta = -365922710 ns)
473[    4.064416] uhci_hcd 0000:00:1d.0: PCI INT A -> GSI 23 (level, low) -> IRQ 23
474[    4.064456] uhci_hcd 0000:00:1d.0: setting latency timer to 64
475[    4.064459] uhci_hcd 0000:00:1d.0: UHCI Host Controller
476[    4.064507] uhci_hcd 0000:00:1d.0: new USB bus registered, assigned bus number 5
477[    4.064560] uhci_hcd 0000:00:1d.0: irq 23, io base 0x0000ff80
478[    4.064639] usb usb5: configuration #1 chosen from 1 choice
479[    4.064686] hub 5-0:1.0: USB hub found
480[    4.064716] hub 5-0:1.0: 2 ports detected
481[    4.168209] uhci_hcd 0000:00:1d.1: PCI INT B -> GSI 17 (level, low) -> IRQ 17
482[    4.168248] uhci_hcd 0000:00:1d.1: setting latency timer to 64
483[    4.168251] uhci_hcd 0000:00:1d.1: UHCI Host Controller
484[    4.168292] uhci_hcd 0000:00:1d.1: new USB bus registered, assigned bus number 6
485[    4.168341] uhci_hcd 0000:00:1d.1: irq 17, io base 0x0000ff60
486[    4.168420] usb usb6: configuration #1 chosen from 1 choice
487[    4.168463] hub 6-0:1.0: USB hub found
488[    4.168494] hub 6-0:1.0: 2 ports detected
489[    4.272392] uhci_hcd 0000:00:1d.2: PCI INT C -> GSI 18 (level, low) -> IRQ 18
490[    4.272425] uhci_hcd 0000:00:1d.2: setting latency timer to 64
491[    4.272427] uhci_hcd 0000:00:1d.2: UHCI Host Controller
492[    4.272470] uhci_hcd 0000:00:1d.2: new USB bus registered, assigned bus number 7
493[    4.272522] uhci_hcd 0000:00:1d.2: irq 18, io base 0x0000ff40
494[    4.272604] usb usb7: configuration #1 chosen from 1 choice
495[    4.272648] hub 7-0:1.0: USB hub found
496[    4.272678] hub 7-0:1.0: 2 ports detected
497[    4.376196] ehci_hcd 0000:00:1d.7: PCI INT A -> GSI 23 (level, low) -> IRQ 23
498[    4.376238] ehci_hcd 0000:00:1d.7: setting latency timer to 64
499[    4.376241] ehci_hcd 0000:00:1d.7: EHCI Host Controller
500[    4.376284] ehci_hcd 0000:00:1d.7: new USB bus registered, assigned bus number 8
501[    4.380207] ehci_hcd 0000:00:1d.7: debug port 1
502[    4.380239] ehci_hcd 0000:00:1d.7: cache line size of 32 is not supported
503[    4.380243] ehci_hcd 0000:00:1d.7: irq 23, io mem 0xff980000
504[    4.416094] usb 2-1: new low speed USB device using uhci_hcd and address 3
505[    4.428083] ehci_hcd 0000:00:1d.7: USB 2.0 started, EHCI 1.00, driver 10 Dec 2004
506[    4.428192] usb usb8: configuration #1 chosen from 1 choice
507[    4.428244] hub 8-0:1.0: USB hub found
508[    4.428283] hub 8-0:1.0: 6 ports detected
509[    4.532230] ahci 0000:00:1f.2: version 3.0
510[    4.532237] ahci 0000:00:1f.2: PCI INT C -> GSI 18 (level, low) -> IRQ 18
511[    4.532327] ahci 0000:00:1f.2: AHCI 0001.0200 32 slots 6 ports 3 Gbps 0x23 impl SATA mode
512[    4.532361] ahci 0000:00:1f.2: flags: 64bit ncq sntf led clo pio ems
513[    4.532392] ahci 0000:00:1f.2: setting latency timer to 64
514[    4.532795] scsi0 : ahci
515[    4.533193] scsi1 : ahci
516[    4.533588] scsi2 : ahci
517[    4.534006] scsi3 : ahci
518[    4.534442] scsi4 : ahci
519[    4.534897] scsi5 : ahci
520[    4.536392] ata1: SATA max UDMA/133 abar m2048@0xff970000 port 0xff970100 irq 220
521[    4.536426] ata2: SATA max UDMA/133 abar m2048@0xff970000 port 0xff970180 irq 220
522[    4.536459] ata3: DUMMY
523[    4.536486] ata4: DUMMY
524[    4.536514] ata5: DUMMY
525[    4.536541] ata6: SATA max UDMA/133 abar m2048@0xff970000 port 0xff970380 irq 220
526[    4.599679] usb 2-1: configuration #1 chosen from 1 choice
527[    4.840082] usb 2-2: new low speed USB device using uhci_hcd and address 4
528[    4.856089] ata1: SATA link up 3.0 Gbps (SStatus 123 SControl 300)
529[    4.864163] ata1.00: ATA-7: SAMSUNG HD322HJ, 1AC01113, max UDMA7
530[    4.864196] ata1.00: 625142448 sectors, multi 0: LBA48 NCQ (depth 31/32)
531[    4.945942] ata1.00: configured for UDMA/133
532[    5.047685] usb 2-2: configuration #1 chosen from 1 choice
533[    5.668089] ata2: SATA link up 1.5 Gbps (SStatus 113 SControl 300)
534[    5.748054] ata2.00: ATAPI: TSSTcorp DVD+/-RW TS-H653F, D300, max UDMA/100
535[    5.748088] ata2.00: applying bridge limits
536[    5.816107] ata2.00: configured for UDMA/100
537[    6.136088] ata6: SATA link down (SStatus 0 SControl 300)
538[    6.136233] scsi 0:0:0:0: Direct-Access     ATA      SAMSUNG HD322HJ  1AC0 PQ: 0 ANSI: 5
539[    6.149199] scsi 1:0:0:0: CD-ROM            TSSTcorp DVD+-RW TS-H653F D300 PQ: 0 ANSI: 5
540[    6.170826] scsi 0:0:0:0: Attached scsi generic sg0 type 0
541[    6.171836] scsi 1:0:0:0: Attached scsi generic sg1 type 5
542[    6.196866] usbcore: registered new interface driver hiddev
543[    6.206899] Driver 'sd' needs updating - please use bus_type methods
544[    6.206987] sd 0:0:0:0: [sda] 625142448 512-byte hardware sectors (320073 MB)
545[    6.207027] sd 0:0:0:0: [sda] Write Protect is off
546[    6.207057] sd 0:0:0:0: [sda] Mode Sense: 00 3a 00 00
547[    6.207073] sd 0:0:0:0: [sda] Write cache: enabled, read cache: enabled, doesn't support DPO or FUA
548[    6.207148] sd 0:0:0:0: [sda] 625142448 512-byte hardware sectors (320073 MB)
549[    6.207187] sd 0:0:0:0: [sda] Write Protect is off
550[    6.207217] sd 0:0:0:0: [sda] Mode Sense: 00 3a 00 00
551[    6.207233] sd 0:0:0:0: [sda] Write cache: enabled, read cache: enabled, doesn't support DPO or FUA
552[    6.207270]  sda:<6>input: DELL DELL USB Laser Mouse as /devices/pci0000:00/0000:00:1a.1/usb2/2-1/2-1:1.0/input/input1
553[    6.213059] Driver 'sr' needs updating - please use bus_type methods
554[    6.213303] input,hidraw0: USB HID v1.10 Mouse [DELL DELL USB Laser Mouse] on usb-0000:00:1a.1-1
555[    6.213998]  sda1 sda2
556[    6.214146] sd 0:0:0:0: [sda] Attached SCSI disk
557[    6.218098] sr0: scsi3-mmc drive: 48x/48x writer dvd-ram cd/rw xa/form2 cdda tray
558[    6.218132] Uniform CD-ROM driver Revision: 3.20
559[    6.218204] sr 1:0:0:0: Attached scsi CD-ROM sr0
560[    6.245602] input: Dell Dell USB Keyboard as /devices/pci0000:00/0000:00:1a.1/usb2/2-2/2-2:1.0/input/input2
561[    6.247418] input,hidraw1: USB HID v1.10 Keyboard [Dell Dell USB Keyboard] on usb-0000:00:1a.1-2
562[    6.247565] usbcore: registered new interface driver usbhid
563[    6.247595] usbhid: v2.6:USB HID core driver
564[    7.596548] PM: Starting manual resume from disk
565[    7.596578] PM: Resume from partition 254:1
566[    7.596579] PM: Checking hibernation image.
567[    7.804107] PM: Resume from disk failed.
568[    8.584148] kjournald starting.  Commit interval 5 seconds
569[    8.584169] EXT3-fs: mounted filesystem with ordered data mode.
570[  117.472189] NET: Registered protocol family 10
571[  117.473187] lo: Disabled Privacy Extensions
572[  122.168383] udevd version 124 started
573[  122.292165] Linux agpgart interface v0.103
574[  122.301965] pci_hotplug: PCI Hot Plug PCI Core version: 0.5
575[  122.309866] shpchp: Standard Hot Plug PCI Controller Driver version: 0.4
576[  122.411398] input: Power Button (FF) as /devices/LNXSYSTM:00/LNXPWRBN:00/input/input3
577[  122.436014] ACPI: Power Button (FF) [PWRF]
578[  122.436093] input: Power Button (CM) as /devices/LNXSYSTM:00/device:00/PNP0C0C:00/input/input4
579[  122.468016] ACPI: Power Button (CM) [VBTN]
580[  122.488049] ACPI: WMI: Mapper loaded
581[  122.517841] parport_pc 00:06: reported by Plug and Play ACPI
582[  122.517918] parport0: PC-style at 0x378 (0x778), irq 7, using FIFO [PCSPP,TRISTATE,COMPAT,ECP]
583[  122.940765] HDA Intel 0000:00:1b.0: PCI INT A -> GSI 16 (level, low) -> IRQ 16
584[  122.940813] HDA Intel 0000:00:1b.0: setting latency timer to 64
585[  123.023786] input: PC Speaker as /devices/platform/pcspkr/input/input5
586[  123.097225] dcdbas dcdbas: Dell Systems Management Base Driver (version 5.6.0-3.2)
587[  124.650095] loop: module loaded
588[  124.661363] lp0: using parport0 (interrupt-driven).
589[  124.946531] Adding 10108920k swap on /dev/mapper/athena10-swap_1.  Priority:-1 extents:1 across:10108920k
590[  133.848279] EXT3 FS on dm-0, internal journal
591[  137.296163] kjournald starting.  Commit interval 5 seconds
592[  137.544034] EXT3 FS on sda1, internal journal
593[  137.544039] EXT3-fs: mounted filesystem with ordered data mode.
594[  140.291727] type=1505 audit(1238093515.279:2): operation="profile_load" name="/usr/share/gdm/guest-session/Xsession" name2="default" pid=4088
595[  140.393329] type=1505 audit(1238093515.383:3): operation="profile_load" name="/usr/lib/cups/backend/cups-pdf" name2="default" pid=4093
596[  140.393430] type=1505 audit(1238093515.383:4): operation="profile_load" name="/usr/sbin/cupsd" name2="default" pid=4093
597[  140.544368] type=1505 audit(1238093515.535:5): operation="profile_load" name="/usr/sbin/named" name2="default" pid=4097
598[  142.257928] ip_tables: (C) 2000-2006 Netfilter Core Team
599[  142.360342] ADDRCONF(NETDEV_UP): eth0: link is not ready
600[  143.996773] 0000:00:19.0: eth0: Link is Up 100 Mbps Full Duplex, Flow Control: RX/TX
601[  143.996776] 0000:00:19.0: eth0: 10/100 speed: disabling TSO
602[  143.996905] ADDRCONF(NETDEV_CHANGE): eth0: link becomes ready
603[  154.012078] eth0: no IPv6 routers present
604[  184.808290] warning: `ntpd' uses 32-bit capabilities (legacy support in use)
605[  194.213045] ACPI: \_SB_.PCI0.IDE1.PRI1.MAS1: found ejectable bay
606[  194.213049] ACPI: \_SB_.PCI0.IDE1.PRI1.MAS1: Adding notify handler
607[  194.213414] ACPI: Bay [\_SB_.PCI0.IDE1.PRI1.MAS1] Added
608[  194.608353] CE: hpet increasing min_delta_ns to 15000 nsec
609[  194.696354] CE: hpet increasing min_delta_ns to 22500 nsec
610[  199.092271] type=1503 audit(1238093874.057:6): operation="inode_permission" requested_mask="r::" denied_mask="r::" fsuid=0 name="/etc/nsswitch.conf.debathena" pid=5032 profile="/usr/sbin/named"
611[  199.092364] type=1503 audit(1238093874.057:7): operation="inode_permission" requested_mask="r::" denied_mask="r::" fsuid=0 name="/etc/nsswitch.conf.debathena" pid=5032 profile="/usr/sbin/named"
612[  199.092552] type=1503 audit(1238093874.057:8): operation="inode_permission" requested_mask="r::" denied_mask="r::" fsuid=0 name="/etc/nsswitch.conf.debathena" pid=5032 profile="/usr/sbin/named"
613[  199.092567] type=1503 audit(1238093874.057:9): operation="inode_permission" requested_mask="r::" denied_mask="r::" fsuid=0 name="/etc/nsswitch.conf.debathena" pid=5032 profile="/usr/sbin/named"
614[  199.364249] type=1503 audit(1238093874.329:10): operation="capable" name="sys_resource" pid=5034 profile="/usr/sbin/named"
615[  199.364365] type=1503 audit(1238093874.329:11): operation="inode_permission" requested_mask="::r" denied_mask="::r" fsuid=113 name="/proc/5033/net/if_inet6" pid=5034 profile="/usr/sbin/named"
616[  199.371825] type=1503 audit(1238093874.333:12): operation="inode_permission" requested_mask="::r" denied_mask="::r" fsuid=113 name="/proc/5033/net/if_inet6" pid=5034 profile="/usr/sbin/named"
617[  199.781278] apm: BIOS version 1.2 Flags 0x03 (Driver version 1.16ac)
618[  199.781282] apm: disabled - APM is not SMP safe.
619[  200.785438] ppdev: user-space parallel port driver
620[  201.200248] type=1503 audit(1238093876.165:13): operation="inode_permission" requested_mask="r::" denied_mask="r::" fsuid=0 name="/etc/nsswitch.conf.debathena" pid=5145 profile="/usr/sbin/cupsd"
621[  201.804175] type=1503 audit(1238093876.769:14): operation="inode_permission" requested_mask="r::" denied_mask="r::" fsuid=0 name="/etc/nsswitch.conf.debathena" pid=5145 profile="/usr/sbin/cupsd"
622[  201.804288] type=1503 audit(1238093876.769:15): operation="inode_permission" requested_mask="r::" denied_mask="r::" fsuid=0 name="/etc/nsswitch.conf.debathena" pid=5145 profile="/usr/sbin/cupsd"
623[  204.174999] __ratelimit: 12 callbacks suppressed
624[  204.175004] type=1503 audit(1238093879.137:20): operation="inode_permission" requested_mask="::r" denied_mask="::r" fsuid=7 name="/etc/nsswitch.conf.debathena" pid=5151 profile="/usr/sbin/cupsd"
625[  211.850560] Bluetooth: Core ver 2.13
626[  211.851439] NET: Registered protocol family 31
627[  211.851443] Bluetooth: HCI device and connection manager initialized
628[  211.851446] Bluetooth: HCI socket layer initialized
629[  211.875410] Bluetooth: L2CAP ver 2.11
630[  211.875414] Bluetooth: L2CAP socket layer initialized
631[  211.894419] Bluetooth: BNEP (Ethernet Emulation) ver 1.3
632[  211.894423] Bluetooth: BNEP filters: protocol multicast
633[  211.924951] Bridge firewalling registered
634[  211.942835] Bluetooth: SCO (Voice Link) ver 0.6
635[  211.942839] Bluetooth: SCO socket layer initialized
636[  212.133366] Bluetooth: RFCOMM socket layer initialized
637[  212.133375] Bluetooth: RFCOMM TTY layer initialized
638[  212.133377] Bluetooth: RFCOMM ver 1.10
639[  213.992387] openafs: module license 'http://www.openafs.org/dl/license10.html' taints kernel.
640[  214.804834] Starting AFS cache scan...found 2485 non-empty cache files (31%).
641[  226.172814] pci 0000:01:00.0: PCI INT A -> GSI 16 (level, low) -> IRQ 16
642[ 3406.452124] kjournald starting.  Commit interval 5 seconds
643[ 3406.452361] EXT3 FS on dm-2, internal journal
644[ 3406.452368] EXT3-fs: mounted filesystem with ordered data mode.
645[ 3504.198586] type=1503 audit(1238097479.083:21): operation="inode_permission" requested_mask="::r" denied_mask="::r" fsuid=113 name="/proc/5033/net/if_inet6" pid=5035 profile="/usr/sbin/named"
646[ 3662.478951] canberra-gtk-pl[6242]: segfault at 1137c7e0 ip b70b184d sp b6e4ef10 error 6 in libpulse.so.0.4.1[b7072000+4e000]
647[ 3673.576592] afs: byte-range lock/unlock ignored; make sure no one else is running this program.
648[ 3753.472248] ppdev0: registered pardevice
649[ 3753.520171] ppdev0: unregistered pardevice
650[ 3753.744114] ppdev0: registered pardevice
651[ 3753.792076] ppdev0: unregistered pardevice
652[ 3753.801807] ppdev0: registered pardevice
653[ 3753.848251] ppdev0: unregistered pardevice