[10734] | 1 | #! /bin/sh |
---|
[9008] | 2 | case $CONFIG in |
---|
| 3 | '') |
---|
[10734] | 4 | if test -f config.sh; then TOP=.; |
---|
| 5 | elif test -f ../config.sh; then TOP=..; |
---|
| 6 | elif test -f ../../config.sh; then TOP=../..; |
---|
| 7 | elif test -f ../../../config.sh; then TOP=../../..; |
---|
| 8 | elif test -f ../../../../config.sh; then TOP=../../../..; |
---|
| 9 | else |
---|
| 10 | echo "Can't find config.sh."; exit 1 |
---|
| 11 | fi |
---|
| 12 | . $TOP/config.sh |
---|
| 13 | ;; |
---|
[9008] | 14 | esac |
---|
[10734] | 15 | : This forces SH files to create target in same directory as SH file. |
---|
| 16 | : This is so that make depend always knows where to find SH derivatives. |
---|
[9008] | 17 | case "$0" in |
---|
| 18 | */*) cd `expr X$0 : 'X\(.*\)/'` ;; |
---|
| 19 | esac |
---|
| 20 | |
---|
| 21 | case "$d_dosuid" in |
---|
| 22 | *define*) suidperl='suidperl' ;; |
---|
| 23 | *) suidperl='';; |
---|
| 24 | esac |
---|
| 25 | |
---|
[10734] | 26 | linklibperl='$(LIBPERL)' |
---|
| 27 | shrpldflags='$(LDDLFLAGS)' |
---|
| 28 | case "$useshrplib" in |
---|
| 29 | true) |
---|
| 30 | pldlflags="$cccdlflags" |
---|
| 31 | # NeXT-4 specific stuff. Can't we do this in the hint file? |
---|
| 32 | case "${osname}${osvers}" in |
---|
| 33 | next4*) |
---|
| 34 | ld=libtool |
---|
| 35 | lddlflags="-dynamic -undefined warning -framework System \ |
---|
| 36 | -compatibility_version 1 -current_version $patchlevel \ |
---|
| 37 | -prebind -seg1addr 0x27000000 -install_name \$(shrpdir)/\$@" |
---|
| 38 | ;; |
---|
| 39 | sunos*|freebsd[23]*|netbsd*) |
---|
| 40 | linklibperl="-lperl" |
---|
| 41 | ;; |
---|
| 42 | aix*) |
---|
| 43 | shrpldflags="-H512 -T512 -bhalt:4 -bM:SRE -bE:perl.exp" |
---|
| 44 | case "$osvers" in |
---|
| 45 | 3*) |
---|
| 46 | shrpldflags="$shrpldflags -e _nostart $ldflags $libs $cryptlib" |
---|
| 47 | ;; |
---|
| 48 | *) |
---|
| 49 | shrpldflags="$shrpldflags -b noentry $ldflags $libs $cryptlib" |
---|
| 50 | ;; |
---|
| 51 | esac |
---|
| 52 | aixinstdir=`pwd | sed 's/\/UU$//'` |
---|
| 53 | linklibperl="-L $archlibexp/CORE -L $aixinstdir -lperl" |
---|
| 54 | ;; |
---|
| 55 | hpux10*) |
---|
| 56 | linklibperl="-L `pwd | sed 's/\/UU$//'` -Wl,+b$archlibexp/CORE -lperl" |
---|
| 57 | ;; |
---|
| 58 | esac |
---|
| 59 | ;; |
---|
| 60 | *) pldlflags='' |
---|
| 61 | ;; |
---|
| 62 | esac |
---|
| 63 | |
---|
| 64 | : Prepare dependency lists for Makefile. |
---|
| 65 | dynamic_list=' ' |
---|
| 66 | for f in $dynamic_ext; do |
---|
| 67 | : the dependency named here will never exist |
---|
| 68 | base=`echo "$f" | sed 's/.*\///'` |
---|
| 69 | dynamic_list="$dynamic_list lib/auto/$f/$base.$dlext" |
---|
| 70 | done |
---|
| 71 | |
---|
| 72 | static_list=' ' |
---|
| 73 | for f in $static_ext; do |
---|
| 74 | base=`echo "$f" | sed 's/.*\///'` |
---|
| 75 | static_list="$static_list lib/auto/$f/$base\$(LIB_EXT)" |
---|
| 76 | done |
---|
| 77 | |
---|
[9008] | 78 | echo "Extracting Makefile (with variable substitutions)" |
---|
[10734] | 79 | $spitshell >Makefile <<!GROK!THIS! |
---|
| 80 | # Makefile.SH |
---|
| 81 | # This file is derived from Makefile.SH. Any changes made here will |
---|
| 82 | # be lost the next time you run Configure. |
---|
| 83 | # Makefile is used to generate $firstmakefile. The only difference |
---|
| 84 | # is that $firstmakefile has the dependencies filled in at the end. |
---|
[9008] | 85 | # |
---|
[9055] | 86 | # |
---|
[10734] | 87 | # I now supply perly.c with the kits, so don't remake perly.c without byacc |
---|
| 88 | BYACC = $byacc |
---|
| 89 | CC = $cc |
---|
| 90 | LD = $ld |
---|
[9008] | 91 | |
---|
| 92 | LDFLAGS = $ldflags |
---|
| 93 | CLDFLAGS = $ldflags |
---|
[10734] | 94 | |
---|
[9008] | 95 | SMALL = $small |
---|
| 96 | LARGE = $large $split |
---|
| 97 | mallocsrc = $mallocsrc |
---|
| 98 | mallocobj = $mallocobj |
---|
[10734] | 99 | LNS = $lns |
---|
[9008] | 100 | RMS = rm -f |
---|
[10734] | 101 | ranlib = $ranlib |
---|
[9008] | 102 | |
---|
[10734] | 103 | # The following are mentioned only to make metaconfig include the |
---|
| 104 | # appropriate questions in Configure. If you want to change these, |
---|
| 105 | # edit config.sh instead, or specify --man1dir=/wherever on |
---|
| 106 | # installman commandline. |
---|
| 107 | bin = $installbin |
---|
| 108 | scriptdir = $scriptdir |
---|
| 109 | shrpdir = $archlibexp/CORE |
---|
| 110 | privlib = $installprivlib |
---|
| 111 | man1dir = $man1dir |
---|
| 112 | man1ext = $man1ext |
---|
| 113 | man3dir = $man3dir |
---|
| 114 | man3ext = $man3ext |
---|
| 115 | |
---|
| 116 | # The following are used to build and install shared libraries for |
---|
| 117 | # dynamic loading. |
---|
| 118 | LDDLFLAGS = $lddlflags |
---|
| 119 | SHRPLDFLAGS = $shrpldflags |
---|
| 120 | CCDLFLAGS = $ccdlflags |
---|
| 121 | DLSUFFIX = .$dlext |
---|
| 122 | PLDLFLAGS = $pldlflags |
---|
| 123 | LIBPERL = $libperl |
---|
| 124 | LLIBPERL= $linklibperl |
---|
| 125 | SHRPENV = $shrpenv |
---|
| 126 | |
---|
| 127 | dynamic_ext = $dynamic_list |
---|
| 128 | static_ext = $static_list |
---|
| 129 | ext = \$(dynamic_ext) \$(static_ext) |
---|
| 130 | DYNALOADER = lib/auto/DynaLoader/DynaLoader\$(LIB_EXT) |
---|
| 131 | |
---|
[9008] | 132 | libs = $libs $cryptlib |
---|
| 133 | |
---|
[10734] | 134 | public = perl $suidperl utilities translators |
---|
[9008] | 135 | |
---|
| 136 | shellflags = $shellflags |
---|
| 137 | |
---|
[10734] | 138 | # This is set to MAKE=$make if your $make command doesn't |
---|
| 139 | # do it for you. |
---|
| 140 | $make_set_make |
---|
[9008] | 141 | |
---|
[10734] | 142 | # These variables will be used in a future version to make |
---|
| 143 | # the make file more portable to non-unix systems. |
---|
| 144 | AR = $ar |
---|
| 145 | EXE_EXT = $exe_ext |
---|
| 146 | LIB_EXT = $lib_ext |
---|
| 147 | OBJ_EXT = $obj_ext |
---|
| 148 | PATH_SEP = $path_sep |
---|
[9008] | 149 | |
---|
[10734] | 150 | FIRSTMAKEFILE = $firstmakefile |
---|
[9008] | 151 | |
---|
[10734] | 152 | # Any special object files needed by this architecture, e.g. os2/os2.obj |
---|
| 153 | ARCHOBJS = $archobjs |
---|
[9008] | 154 | |
---|
[10734] | 155 | .SUFFIXES: .c \$(OBJ_EXT) |
---|
[9008] | 156 | |
---|
[10734] | 157 | # grrr |
---|
| 158 | SHELL = $sh |
---|
[9008] | 159 | |
---|
[10734] | 160 | !GROK!THIS! |
---|
[9008] | 161 | |
---|
[10734] | 162 | ## In the following dollars and backticks do not need the extra backslash. |
---|
| 163 | $spitshell >>Makefile <<'!NO!SUBS!' |
---|
[9008] | 164 | |
---|
[10734] | 165 | CCCMD = `sh $(shellflags) cflags $(LIBPERL) $@` |
---|
[9008] | 166 | |
---|
[10734] | 167 | private = preplibrary lib/ExtUtils/Miniperl.pm lib/Config.pm |
---|
[9008] | 168 | |
---|
[10734] | 169 | # Files to be built with variable substitution before miniperl |
---|
| 170 | # is available. |
---|
| 171 | sh = Makefile.SH cflags.SH config_h.SH makeaperl.SH makedepend.SH \ |
---|
| 172 | makedir.SH perl_exp.SH writemain.SH |
---|
[9008] | 173 | |
---|
[10734] | 174 | shextract = Makefile cflags config.h makeaperl makedepend \ |
---|
| 175 | makedir perl.exp writemain |
---|
[9008] | 176 | |
---|
[10734] | 177 | # Files to be built with variable substitution after miniperl is |
---|
| 178 | # available. Dependencies handled manually below (for now). |
---|
[9008] | 179 | |
---|
[10734] | 180 | pl = pod/pod2html.PL pod/pod2latex.PL pod/pod2man.PL pod/pod2text.PL |
---|
[9008] | 181 | |
---|
[10734] | 182 | plextract = pod/pod2html pod/pod2latex pod/pod2man pod/pod2text |
---|
[9008] | 183 | |
---|
[10734] | 184 | addedbyconf = UU $(shextract) $(plextract) pstruct |
---|
[9008] | 185 | |
---|
[10734] | 186 | h1 = EXTERN.h INTERN.h XSUB.h av.h config.h cop.h cv.h dosish.h |
---|
| 187 | h2 = embed.h form.h gv.h handy.h hv.h keywords.h mg.h op.h |
---|
| 188 | h3 = opcode.h patchlevel.h perl.h perly.h pp.h proto.h regcomp.h |
---|
| 189 | h4 = regexp.h scope.h sv.h unixish.h util.h perlio.h |
---|
| 190 | h = $(h1) $(h2) $(h3) $(h4) |
---|
[9008] | 191 | |
---|
[10734] | 192 | c1 = $(mallocsrc) av.c scope.c op.c doop.c doio.c dump.c hv.c mg.c |
---|
| 193 | c2 = perl.c perly.c pp.c pp_hot.c pp_ctl.c pp_sys.c regcomp.c regexec.c |
---|
| 194 | c3 = gv.c sv.c taint.c toke.c util.c deb.c run.c universal.c globals.c perlio.c |
---|
[9008] | 195 | |
---|
[10734] | 196 | c = $(c1) $(c2) $(c3) miniperlmain.c perlmain.c |
---|
[9008] | 197 | |
---|
[10734] | 198 | obj1 = $(mallocobj) gv$(OBJ_EXT) toke$(OBJ_EXT) perly$(OBJ_EXT) op$(OBJ_EXT) regcomp$(OBJ_EXT) dump$(OBJ_EXT) util$(OBJ_EXT) mg$(OBJ_EXT) |
---|
| 199 | obj2 = hv$(OBJ_EXT) av$(OBJ_EXT) run$(OBJ_EXT) pp_hot$(OBJ_EXT) sv$(OBJ_EXT) pp$(OBJ_EXT) scope$(OBJ_EXT) pp_ctl$(OBJ_EXT) pp_sys$(OBJ_EXT) |
---|
| 200 | obj3 = doop$(OBJ_EXT) doio$(OBJ_EXT) regexec$(OBJ_EXT) taint$(OBJ_EXT) deb$(OBJ_EXT) universal$(OBJ_EXT) globals$(OBJ_EXT) perlio$(OBJ_EXT) |
---|
| 201 | |
---|
| 202 | obj = $(obj1) $(obj2) $(obj3) $(ARCHOBJS) |
---|
| 203 | |
---|
| 204 | # Once perl has been Configure'd and built ok you build different |
---|
| 205 | # perl variants (Debugging, Embedded, Multiplicity etc) by saying: |
---|
| 206 | # make clean; make LIBPERL=libperl<type>.a |
---|
| 207 | # where <type> is some combination of 'd' and(or) 'e' or 'm'. |
---|
| 208 | # See cflags to understand how this works. |
---|
| 209 | # |
---|
| 210 | # This mechanism is getting clunky and might not even work any more. |
---|
| 211 | # EMBEDDING is on by default, and MULTIPLICITY doesn't work. |
---|
| 212 | # |
---|
| 213 | |
---|
[9008] | 214 | lintflags = -hbvxac |
---|
| 215 | |
---|
[10734] | 216 | .c$(OBJ_EXT): |
---|
| 217 | $(CCCMD) $(PLDLFLAGS) $*.c |
---|
[9008] | 218 | |
---|
[10734] | 219 | all: $(FIRSTMAKEFILE) miniperl $(private) $(plextract) $(public) $(dynamic_ext) |
---|
| 220 | @echo " "; echo " Everything is up to date." |
---|
[9008] | 221 | |
---|
[10734] | 222 | translators: miniperl lib/Config.pm FORCE |
---|
| 223 | @echo " "; echo " Making x2p stuff"; cd x2p; $(MAKE) all |
---|
[9008] | 224 | |
---|
[10734] | 225 | utilities: miniperl lib/Config.pm FORCE |
---|
| 226 | @echo " "; echo " Making utilities"; cd utils; $(MAKE) all |
---|
[9008] | 227 | |
---|
[10734] | 228 | |
---|
| 229 | # This is now done by installman only if you actually want the man pages. |
---|
| 230 | # @echo " "; echo " Making docs"; cd pod; $(MAKE) all; |
---|
| 231 | |
---|
| 232 | # Phony target to force checking subdirectories. |
---|
| 233 | # Apparently some makes require an action for the FORCE target. |
---|
| 234 | FORCE: |
---|
| 235 | @sh -c true |
---|
| 236 | |
---|
| 237 | miniperlmain$(OBJ_EXT): miniperlmain.c |
---|
| 238 | $(CCCMD) $(PLDLFLAGS) $*.c |
---|
| 239 | |
---|
| 240 | perlmain.c: miniperlmain.c config.sh $(FIRSTMAKEFILE) |
---|
| 241 | sh writemain $(DYNALOADER) $(static_ext) > tmp |
---|
| 242 | sh mv-if-diff tmp perlmain.c |
---|
| 243 | |
---|
| 244 | perlmain$(OBJ_EXT): perlmain.c |
---|
| 245 | $(CCCMD) $(PLDLFLAGS) $*.c |
---|
| 246 | |
---|
| 247 | # The file ext.libs is a list of libraries that must be linked in |
---|
| 248 | # for static extensions, e.g. -lm -lgdbm, etc. The individual |
---|
| 249 | # static extension Makefile's add to it. |
---|
| 250 | ext.libs: $(static_ext) |
---|
| 251 | -@test -f ext.libs || touch ext.libs |
---|
| 252 | |
---|
| 253 | !NO!SUBS! |
---|
| 254 | |
---|
| 255 | # How to build libperl. This is still rather convoluted. |
---|
| 256 | # Load up custom Makefile.SH fragment for shared loading and executables: |
---|
| 257 | if test -r $osname/Makefile.SHs ; then |
---|
| 258 | . $osname/Makefile.SHs |
---|
| 259 | $spitshell >>Makefile <<!GROK!THIS! |
---|
| 260 | |
---|
| 261 | Makefile: $osname/Makefile.SHs |
---|
| 262 | !GROK!THIS! |
---|
| 263 | else |
---|
| 264 | $spitshell >>Makefile <<'!NO!SUBS!' |
---|
| 265 | $(LIBPERL): $& perl$(OBJ_EXT) $(obj) |
---|
| 266 | !NO!SUBS! |
---|
| 267 | case "$useshrplib" in |
---|
| 268 | true) |
---|
| 269 | $spitshell >>Makefile <<'!NO!SUBS!' |
---|
| 270 | $(LD) $(SHRPLDFLAGS) -o $@ perl$(OBJ_EXT) $(obj) |
---|
| 271 | !NO!SUBS! |
---|
| 272 | case "$osname" in |
---|
| 273 | aix) |
---|
| 274 | $spitshell >>Makefile <<'!NO!SUBS!' |
---|
| 275 | mv $@ libperl$(OBJ_EXT) |
---|
| 276 | $(AR) qv $(LIBPERL) libperl$(OBJ_EXT) |
---|
| 277 | !NO!SUBS! |
---|
| 278 | ;; |
---|
| 279 | esac |
---|
| 280 | ;; |
---|
| 281 | *) |
---|
| 282 | $spitshell >>Makefile <<'!NO!SUBS!' |
---|
| 283 | rm -f $(LIBPERL) |
---|
| 284 | $(AR) rcu $(LIBPERL) perl$(OBJ_EXT) $(obj) |
---|
| 285 | @$(ranlib) $(LIBPERL) |
---|
| 286 | !NO!SUBS! |
---|
| 287 | ;; |
---|
| 288 | esac |
---|
| 289 | $spitshell >>Makefile <<'!NO!SUBS!' |
---|
| 290 | |
---|
| 291 | # How to build executables. |
---|
| 292 | |
---|
| 293 | # The $& notation tells Sequent machines that it can do a parallel make, |
---|
[9008] | 294 | # and is harmless otherwise. |
---|
[10734] | 295 | # The miniperl -w -MExporter line is a basic cheap test to catch errors |
---|
| 296 | # before make goes on to run preplibrary and then MakeMaker on extensions. |
---|
| 297 | # This is very handy because later errors are often caused by miniperl |
---|
| 298 | # build problems but that's not obvious to the novice. |
---|
| 299 | # The Module used here must not depend on Config or any extensions. |
---|
[9008] | 300 | |
---|
[10734] | 301 | miniperl: $& miniperlmain$(OBJ_EXT) $(LIBPERL) |
---|
| 302 | $(CC) $(LARGE) $(CLDFLAGS) -o miniperl miniperlmain$(OBJ_EXT) $(LLIBPERL) $(libs) |
---|
| 303 | @./miniperl -w -Ilib -MExporter -e 0 || $(MAKE) minitest |
---|
[9008] | 304 | |
---|
[10734] | 305 | perl: $& perlmain$(OBJ_EXT) $(LIBPERL) $(DYNALOADER) $(static_ext) ext.libs |
---|
| 306 | $(SHRPENV) $(CC) $(LARGE) $(CLDFLAGS) $(CCDLFLAGS) -o perl perlmain$(OBJ_EXT) $(DYNALOADER) $(static_ext) $(LLIBPERL) `cat ext.libs` $(libs) |
---|
[9008] | 307 | |
---|
[10734] | 308 | pureperl: $& perlmain$(OBJ_EXT) $(LIBPERL) $(DYNALOADER) $(static_ext) ext.libs |
---|
| 309 | $(SHRPENV) purify $(CC) $(LARGE) $(CLDFLAGS) $(CCDLFLAGS) -o pureperl perlmain$(OBJ_EXT) $(DYNALOADER) $(static_ext) $(LLIBPERL) `cat ext.libs` $(libs) |
---|
[9008] | 310 | |
---|
[10734] | 311 | purecovperl: $& perlmain$(OBJ_EXT) $(LIBPERL) $(DYNALOADER) $(static_ext) ext.libs |
---|
| 312 | $(SHRPENV) purecov $(CC) $(LARGE) $(CLDFLAGS) $(CCDLFLAGS) -o purecovperl perlmain$(OBJ_EXT) $(DYNALOADER) $(static_ext) $(LLIBPERL) `cat ext.libs` $(libs) |
---|
[9008] | 313 | |
---|
[10734] | 314 | quantperl: $& perlmain$(OBJ_EXT) $(LIBPERL) $(DYNALOADER) $(static_ext) ext.libs |
---|
| 315 | $(SHRPENV) quantify $(CC) $(LARGE) $(CLDFLAGS) $(CCDLFLAGS) -o quantperl perlmain$(OBJ_EXT) $(DYNALOADER) $(static_ext) $(LLIBPERL) `cat ext.libs` $(libs) |
---|
[9008] | 316 | |
---|
| 317 | # This version, if specified in Configure, does ONLY those scripts which need |
---|
| 318 | # set-id emulation. Suidperl must be setuid root. It contains the "taint" |
---|
| 319 | # checks as well as the special code to validate that the script in question |
---|
| 320 | # has been invoked correctly. |
---|
| 321 | |
---|
[10734] | 322 | suidperl: $& sperl$(OBJ_EXT) perlmain$(OBJ_EXT) $(LIBPERL) $(DYNALOADER) $(static_ext) ext.libs |
---|
| 323 | $(SHRPENV) $(CC) $(LARGE) $(CLDFLAGS) $(CCDLFLAGS) -o suidperl perlmain$(OBJ_EXT) sperl$(OBJ_EXT) $(DYNALOADER) $(static_ext) $(LLIBPERL) `cat ext.libs` $(libs) |
---|
[9008] | 324 | |
---|
[10734] | 325 | !NO!SUBS! |
---|
[9008] | 326 | |
---|
[10734] | 327 | fi |
---|
[9008] | 328 | |
---|
[10734] | 329 | $spitshell >>Makefile <<'!NO!SUBS!' |
---|
[9008] | 330 | |
---|
[10734] | 331 | sperl$(OBJ_EXT): perl.c perly.h patchlevel.h $(h) |
---|
[9008] | 332 | $(RMS) sperl.c |
---|
[10734] | 333 | $(LNS) perl.c sperl.c |
---|
| 334 | $(CCCMD) -DIAMSUID sperl.c |
---|
[9008] | 335 | $(RMS) sperl.c |
---|
| 336 | |
---|
[10734] | 337 | # We have to call our ./makedir because Ultrix 4.3 make can't handle the line |
---|
| 338 | # test -d lib/auto || mkdir lib/auto |
---|
| 339 | # |
---|
| 340 | preplibrary: miniperl lib/Config.pm $(plextract) |
---|
| 341 | @sh ./makedir lib/auto |
---|
| 342 | @echo " AutoSplitting perl library" |
---|
| 343 | @./miniperl -Ilib -e 'use AutoSplit; \ |
---|
| 344 | autosplit_lib_modules(@ARGV)' lib/*.pm lib/*/*.pm |
---|
[9008] | 345 | |
---|
[10734] | 346 | # Take care to avoid modifying lib/Config.pm without reason |
---|
| 347 | # (If trying to create a new port and having problems with the configpm script, |
---|
| 348 | # try 'make minitest' and/or commenting out the tests at the end of configpm.) |
---|
| 349 | lib/Config.pm: config.sh miniperl configpm |
---|
| 350 | ./miniperl configpm tmp |
---|
| 351 | sh mv-if-diff tmp lib/Config.pm |
---|
[9008] | 352 | |
---|
[10734] | 353 | lib/ExtUtils/Miniperl.pm: miniperlmain.c miniperl minimod.pl lib/Config.pm |
---|
| 354 | ./miniperl minimod.pl > tmp && mv tmp $@ |
---|
[9008] | 355 | |
---|
[10734] | 356 | $(plextract): miniperl lib/Config.pm |
---|
| 357 | ./miniperl -Ilib $@.PL |
---|
[9008] | 358 | |
---|
[10734] | 359 | install: all install.perl install.man |
---|
[9008] | 360 | |
---|
[10734] | 361 | install.perl: all installperl |
---|
| 362 | ./perl installperl |
---|
[9008] | 363 | |
---|
[10734] | 364 | install.man: all installman |
---|
| 365 | ./perl installman |
---|
[9008] | 366 | |
---|
[10734] | 367 | # XXX Experimental. Hardwired values, but useful for testing. |
---|
| 368 | # Eventually Configure could ask for some of these values. |
---|
| 369 | install.html: all installhtml |
---|
| 370 | ./perl installhtml \ |
---|
| 371 | --podroot=. --podpath=. --recurse \ |
---|
| 372 | --htmldir=$(privlib)/html \ |
---|
| 373 | --htmlroot=$(privlib)/html \ |
---|
| 374 | --splithead=pod/perlipc \ |
---|
| 375 | --splititem=pod/perlfunc \ |
---|
| 376 | --libpods=perlfunc:perlguts:perlvar:perlrun:perlop \ |
---|
| 377 | --verbose |
---|
[9008] | 378 | |
---|
| 379 | |
---|
[10734] | 380 | # I now supply perly.c with the kits, so the following section is |
---|
| 381 | # used only if you force byacc to run by saying |
---|
| 382 | # make run_byacc |
---|
| 383 | # Since we patch up the byacc output, the perly.fixer script needs |
---|
| 384 | # to run with precisely the same version of byacc as I use. You |
---|
| 385 | # normally shouldn't remake perly.[ch]. |
---|
[9008] | 386 | |
---|
[10734] | 387 | run_byacc: FORCE |
---|
| 388 | @ echo 'Expect' 113 shift/reduce and 1 reduce/reduce conflict |
---|
| 389 | $(BYACC) -d perly.y |
---|
| 390 | chmod 664 perly.c |
---|
| 391 | sh $(shellflags) ./perly.fixer y.tab.c perly.c |
---|
| 392 | sed -e 's/fprintf *( *stderr *,/PerlIO_printf(Perl_debug_log,/g' \ |
---|
| 393 | -e 's/y\.tab/perly/g' perly.c >perly.tmp && mv perly.tmp perly.c |
---|
| 394 | echo 'extern YYSTYPE yylval;' >>y.tab.h |
---|
| 395 | cmp -s y.tab.h perly.h && rm -f y.tab.h || mv y.tab.h perly.h |
---|
| 396 | chmod 664 vms/perly_c.vms vms/perly_h.vms |
---|
| 397 | perl vms/vms_yfix.pl perly.c perly.h vms/perly_c.vms vms/perly_h.vms |
---|
[9008] | 398 | |
---|
[10734] | 399 | # We don't want to regenerate perly.c and perly.h, but they might |
---|
| 400 | # appear out-of-date after a patch is applied or a new distribution is |
---|
| 401 | # made. |
---|
| 402 | perly.c: perly.y |
---|
| 403 | -@sh -c true |
---|
[9008] | 404 | |
---|
[10734] | 405 | perly.h: perly.y |
---|
| 406 | -@sh -c true |
---|
[9008] | 407 | |
---|
[10734] | 408 | # The following three header files are generated automatically |
---|
| 409 | # keywords.h: keywords.pl |
---|
| 410 | # opcode.h: opcode.pl |
---|
| 411 | # embed.h: embed.pl global.sym interp.sym |
---|
| 412 | # The correct versions should be already supplied with the perl kit, |
---|
| 413 | # in case you don't have perl available. |
---|
| 414 | # To force them to run, type |
---|
| 415 | # make regen_headers |
---|
| 416 | regen_headers: FORCE |
---|
| 417 | perl keywords.pl |
---|
| 418 | perl opcode.pl |
---|
| 419 | perl embed.pl |
---|
[9008] | 420 | |
---|
[10734] | 421 | # Extensions: |
---|
| 422 | # Names added to $(dynamic_ext) or $(static_ext) will automatically |
---|
| 423 | # get built. There should ordinarily be no need to change any of |
---|
| 424 | # this part of makefile. |
---|
| 425 | # |
---|
| 426 | # The dummy dependency is a place holder in case $(dynamic_ext) or |
---|
| 427 | # $(static_ext) is empty. |
---|
| 428 | # |
---|
| 429 | # DynaLoader may be needed for extensions that use Makefile.PL. |
---|
[9008] | 430 | |
---|
[10734] | 431 | $(DYNALOADER): miniperl preplibrary FORCE |
---|
| 432 | @sh ext/util/make_ext static $@ MAKE=$(MAKE) LIBPERL_A=$(LIBPERL) |
---|
[9008] | 433 | |
---|
[10734] | 434 | d_dummy $(dynamic_ext): miniperl preplibrary $(DYNALOADER) FORCE |
---|
| 435 | @sh ext/util/make_ext dynamic $@ MAKE=$(MAKE) LIBPERL_A=$(LIBPERL) |
---|
[9008] | 436 | |
---|
[10734] | 437 | s_dummy $(static_ext): miniperl preplibrary $(DYNALOADER) FORCE |
---|
| 438 | @sh ext/util/make_ext static $@ MAKE=$(MAKE) LIBPERL_A=$(LIBPERL) |
---|
[9008] | 439 | |
---|
[10734] | 440 | clean: _tidy _mopup |
---|
[9008] | 441 | |
---|
[10734] | 442 | realclean: _cleaner _mopup |
---|
| 443 | @echo "Note that make realclean does not delete config.sh" |
---|
[9008] | 444 | |
---|
[10734] | 445 | clobber: _cleaner _mopup |
---|
| 446 | rm -f config.sh cppstdin |
---|
[9008] | 447 | |
---|
[10734] | 448 | distclean: clobber |
---|
[9008] | 449 | |
---|
[10734] | 450 | # Do not 'make _mopup' directly. |
---|
| 451 | _mopup: |
---|
| 452 | rm -f *$(OBJ_EXT) *$(LIB_EXT) all perlmain.c |
---|
| 453 | rm -f perl.exp ext.libs |
---|
| 454 | -rm -f perl.export perl.dll perl.libexp perl.map perl.def |
---|
| 455 | rm -f perl suidperl miniperl $(LIBPERL) |
---|
[9008] | 456 | |
---|
[10734] | 457 | # Do not 'make _tidy' directly. |
---|
| 458 | _tidy: |
---|
| 459 | -cd pod; $(MAKE) clean |
---|
| 460 | -cd utils; $(MAKE) clean |
---|
| 461 | -cd x2p; $(MAKE) clean |
---|
| 462 | -@for x in $(DYNALOADER) $(dynamic_ext) $(static_ext) ; do \ |
---|
| 463 | sh ext/util/make_ext clean $$x MAKE=$(MAKE) ; \ |
---|
| 464 | done |
---|
| 465 | |
---|
| 466 | # Do not 'make _cleaner' directly. |
---|
| 467 | _cleaner: |
---|
| 468 | -cd os2; rm -f Makefile |
---|
| 469 | -cd pod; $(MAKE) realclean |
---|
| 470 | -cd utils; $(MAKE) realclean |
---|
| 471 | -cd x2p; $(MAKE) realclean |
---|
| 472 | -@for x in $(DYNALOADER) $(dynamic_ext) $(static_ext) ; do \ |
---|
| 473 | sh ext/util/make_ext realclean $$x MAKE=$(MAKE) ; \ |
---|
| 474 | done |
---|
| 475 | rm -f *.orig */*.orig *~ */*~ core t/core t/c t/perl |
---|
| 476 | rm -rf $(addedbyconf) |
---|
| 477 | rm -f $(FIRSTMAKEFILE) $(FIRSTMAKEFILE).old |
---|
| 478 | rm -f $(private) |
---|
| 479 | rm -rf lib/auto |
---|
| 480 | rm -f lib/.exists |
---|
| 481 | rm -f h2ph.man pstruct |
---|
| 482 | rm -rf .config |
---|
| 483 | |
---|
[9008] | 484 | # The following lint has practically everything turned on. Unfortunately, |
---|
| 485 | # you have to wade through a lot of mumbo jumbo that can't be suppressed. |
---|
| 486 | # If the source file has a /*NOSTRICT*/ somewhere, ignore the lint message |
---|
| 487 | # for that spot. |
---|
| 488 | |
---|
| 489 | lint: perly.c $(c) |
---|
| 490 | lint $(lintflags) $(defs) perly.c $(c) > perl.fuzz |
---|
| 491 | |
---|
[10734] | 492 | # Need to unset during recursion to go out of loop. |
---|
| 493 | # The README below ensures that the dependency list is never empty and |
---|
| 494 | # that when MAKEDEPEND is empty $(FIRSTMAKEFILE) doesn't need rebuilding. |
---|
| 495 | |
---|
| 496 | MAKEDEPEND = Makefile makedepend |
---|
| 497 | |
---|
| 498 | $(FIRSTMAKEFILE): README $(MAKEDEPEND) |
---|
| 499 | $(MAKE) depend MAKEDEPEND= |
---|
| 500 | |
---|
| 501 | config.h: config_h.SH config.sh |
---|
| 502 | $(SHELL) config_h.SH |
---|
| 503 | |
---|
| 504 | perl.exp: perl_exp.SH config.sh |
---|
| 505 | $(SHELL) perl_exp.SH |
---|
| 506 | |
---|
| 507 | # When done, touch perlmain.c so that it doesn't get remade each time. |
---|
[9008] | 508 | depend: makedepend |
---|
[10734] | 509 | sh ./makedepend MAKE=$(MAKE) |
---|
| 510 | - test -s perlmain.c && touch perlmain.c |
---|
[9008] | 511 | cd x2p; $(MAKE) depend |
---|
| 512 | |
---|
[10734] | 513 | # Cannot postpone this until $firstmakefile is ready ;-) |
---|
| 514 | makedepend: makedepend.SH config.sh |
---|
| 515 | sh ./makedepend.SH |
---|
[9008] | 516 | |
---|
[10734] | 517 | test-prep: miniperl perl preplibrary $(dynamic_ext) |
---|
| 518 | cd t && (rm -f perl$(EXE_EXT); $(LNS) ../perl$(EXE_EXT) perl$(EXE_EXT)) |
---|
| 519 | |
---|
| 520 | test check: test-prep |
---|
[10761] | 521 | cd t && ./perl TEST |
---|
[10734] | 522 | |
---|
| 523 | # For testing without a tty or controling terminal. See t/op/stat.t |
---|
| 524 | test-notty: test-prep |
---|
| 525 | cd t && PERL_SKIP_TTY_TEST=1 ./perl TEST |
---|
| 526 | |
---|
| 527 | # Can't depend on lib/Config.pm because that might be where miniperl |
---|
| 528 | # is crashing. |
---|
| 529 | minitest: miniperl |
---|
| 530 | @echo "You may see some irrelevant test failures if you have been unable" |
---|
| 531 | @echo "to build lib/Config.pm." |
---|
| 532 | - cd t && (rm -f perl$(EXE_EXT); $(LNS) ../miniperl$(EXE_EXT) perl$(EXE_EXT)) \ |
---|
[10761] | 533 | && ./perl TEST base/*.t comp/*.t cmd/*.t io/*.t op/*.t pragma/*.t |
---|
[10734] | 534 | |
---|
| 535 | # Handy way to run perlbug -ok without having to install and run the |
---|
| 536 | # installed perlbug. We don't re-run the tests here - we trust the user. |
---|
| 537 | # Please *don't* use this unless all tests pass. |
---|
| 538 | # If you want to report test failures, just use "perlbug -Ilib". |
---|
| 539 | ok: |
---|
| 540 | ./perl -Ilib utils/perlbug -ok -s '(UNINSTALLED)' |
---|
| 541 | |
---|
| 542 | clist: $(c) |
---|
[9008] | 543 | echo $(c) | tr ' ' '\012' >.clist |
---|
| 544 | |
---|
[10734] | 545 | hlist: $(h) |
---|
[9008] | 546 | echo $(h) | tr ' ' '\012' >.hlist |
---|
| 547 | |
---|
[10734] | 548 | shlist: $(sh) |
---|
[9008] | 549 | echo $(sh) | tr ' ' '\012' >.shlist |
---|
| 550 | |
---|
[10734] | 551 | pllist: $(pl) |
---|
| 552 | echo $(pl) | tr ' ' '\012' >.pllist |
---|
| 553 | |
---|
| 554 | Makefile: Makefile.SH ./config.sh |
---|
| 555 | $(SHELL) Makefile.SH |
---|
| 556 | |
---|
| 557 | distcheck: FORCE |
---|
| 558 | perl '-MExtUtils::Manifest=&fullcheck' -e 'fullcheck()' |
---|
| 559 | |
---|
[9008] | 560 | # AUTOMATICALLY GENERATED MAKE DEPENDENCIES--PUT NOTHING BELOW THIS LINE |
---|
[10734] | 561 | # If this runs make out of memory, delete /usr/include lines. |
---|
[9008] | 562 | !NO!SUBS! |
---|
[10734] | 563 | |
---|
[9008] | 564 | $eunicefix Makefile |
---|
| 565 | case `pwd` in |
---|
| 566 | *SH) |
---|
| 567 | $rm -f ../Makefile |
---|
[10734] | 568 | $ln Makefile ../Makefile |
---|
[9008] | 569 | ;; |
---|
| 570 | esac |
---|
[10734] | 571 | $rm -f $firstmakefile |
---|