| 1 | # Makefile.in generated automatically by automake 1.4-p6 from Makefile.am |
|---|
| 2 | |
|---|
| 3 | # Copyright (C) 1994, 1995-8, 1999, 2001 Free Software Foundation, Inc. |
|---|
| 4 | # This Makefile.in is free software; the Free Software Foundation |
|---|
| 5 | # gives unlimited permission to copy and/or distribute it, |
|---|
| 6 | # with or without modifications, as long as this notice is preserved. |
|---|
| 7 | |
|---|
| 8 | # This program is distributed in the hope that it will be useful, |
|---|
| 9 | # but WITHOUT ANY WARRANTY, to the extent permitted by law; without |
|---|
| 10 | # even the implied warranty of MERCHANTABILITY or FITNESS FOR A |
|---|
| 11 | # PARTICULAR PURPOSE. |
|---|
| 12 | |
|---|
| 13 | |
|---|
| 14 | SHELL = @SHELL@ |
|---|
| 15 | |
|---|
| 16 | srcdir = @srcdir@ |
|---|
| 17 | top_srcdir = @top_srcdir@ |
|---|
| 18 | VPATH = @srcdir@ |
|---|
| 19 | prefix = @prefix@ |
|---|
| 20 | exec_prefix = @exec_prefix@ |
|---|
| 21 | |
|---|
| 22 | bindir = @bindir@ |
|---|
| 23 | sbindir = @sbindir@ |
|---|
| 24 | libexecdir = @libexecdir@ |
|---|
| 25 | datadir = @datadir@ |
|---|
| 26 | sysconfdir = @sysconfdir@ |
|---|
| 27 | sharedstatedir = @sharedstatedir@ |
|---|
| 28 | localstatedir = @localstatedir@ |
|---|
| 29 | libdir = @libdir@ |
|---|
| 30 | infodir = @infodir@ |
|---|
| 31 | mandir = @mandir@ |
|---|
| 32 | includedir = @includedir@ |
|---|
| 33 | oldincludedir = /usr/include |
|---|
| 34 | |
|---|
| 35 | DESTDIR = |
|---|
| 36 | |
|---|
| 37 | pkgdatadir = $(datadir)/@PACKAGE@ |
|---|
| 38 | pkglibdir = $(libdir)/@PACKAGE@ |
|---|
| 39 | pkgincludedir = $(includedir)/@PACKAGE@ |
|---|
| 40 | |
|---|
| 41 | top_builddir = . |
|---|
| 42 | |
|---|
| 43 | ACLOCAL = @ACLOCAL@ |
|---|
| 44 | AUTOCONF = @AUTOCONF@ |
|---|
| 45 | AUTOMAKE = @AUTOMAKE@ |
|---|
| 46 | AUTOHEADER = @AUTOHEADER@ |
|---|
| 47 | |
|---|
| 48 | INSTALL = @INSTALL@ |
|---|
| 49 | INSTALL_PROGRAM = @INSTALL_PROGRAM@ $(AM_INSTALL_PROGRAM_FLAGS) |
|---|
| 50 | INSTALL_DATA = @INSTALL_DATA@ |
|---|
| 51 | INSTALL_SCRIPT = @INSTALL_SCRIPT@ |
|---|
| 52 | transform = @program_transform_name@ |
|---|
| 53 | |
|---|
| 54 | NORMAL_INSTALL = : |
|---|
| 55 | PRE_INSTALL = : |
|---|
| 56 | POST_INSTALL = : |
|---|
| 57 | NORMAL_UNINSTALL = : |
|---|
| 58 | PRE_UNINSTALL = : |
|---|
| 59 | POST_UNINSTALL = : |
|---|
| 60 | host_alias = @host_alias@ |
|---|
| 61 | host_triplet = @host@ |
|---|
| 62 | AS = @AS@ |
|---|
| 63 | CATALOGS = @CATALOGS@ |
|---|
| 64 | CATOBJEXT = @CATOBJEXT@ |
|---|
| 65 | CC = @CC@ |
|---|
| 66 | CFLAGS = @CFLAGS@ |
|---|
| 67 | DATADIRNAME = @DATADIRNAME@ |
|---|
| 68 | DLLTOOL = @DLLTOOL@ |
|---|
| 69 | ECHO = @ECHO@ |
|---|
| 70 | EXEEXT = @EXEEXT@ |
|---|
| 71 | GETTEXT_PACKAGE = @GETTEXT_PACKAGE@ |
|---|
| 72 | GLIB_CFLAGS = @GLIB_CFLAGS@ |
|---|
| 73 | GLIB_GENMARSHAL = @GLIB_GENMARSHAL@ |
|---|
| 74 | GLIB_LIBS = @GLIB_LIBS@ |
|---|
| 75 | GLIB_MKENUMS = @GLIB_MKENUMS@ |
|---|
| 76 | GMOFILES = @GMOFILES@ |
|---|
| 77 | GMSGFMT = @GMSGFMT@ |
|---|
| 78 | GNOME_ACLOCAL_DIR = @GNOME_ACLOCAL_DIR@ |
|---|
| 79 | GNOME_ACLOCAL_FLAGS = @GNOME_ACLOCAL_FLAGS@ |
|---|
| 80 | GOBJECT_QUERY = @GOBJECT_QUERY@ |
|---|
| 81 | GTKDOC = @GTKDOC@ |
|---|
| 82 | HAVE_GTK_DOC = @HAVE_GTK_DOC@ |
|---|
| 83 | INSTOBJEXT = @INSTOBJEXT@ |
|---|
| 84 | INTLDEPS = @INTLDEPS@ |
|---|
| 85 | INTLLIBS = @INTLLIBS@ |
|---|
| 86 | INTLOBJS = @INTLOBJS@ |
|---|
| 87 | INTLTOOL_CAVES_RULE = @INTLTOOL_CAVES_RULE@ |
|---|
| 88 | INTLTOOL_DESKTOP_RULE = @INTLTOOL_DESKTOP_RULE@ |
|---|
| 89 | INTLTOOL_DIRECTORY_RULE = @INTLTOOL_DIRECTORY_RULE@ |
|---|
| 90 | INTLTOOL_EXTRACT = @INTLTOOL_EXTRACT@ |
|---|
| 91 | INTLTOOL_KEYS_RULE = @INTLTOOL_KEYS_RULE@ |
|---|
| 92 | INTLTOOL_MERGE = @INTLTOOL_MERGE@ |
|---|
| 93 | INTLTOOL_OAF_RULE = @INTLTOOL_OAF_RULE@ |
|---|
| 94 | INTLTOOL_PERL = @INTLTOOL_PERL@ |
|---|
| 95 | INTLTOOL_PONG_RULE = @INTLTOOL_PONG_RULE@ |
|---|
| 96 | INTLTOOL_SCHEMAS_RULE = @INTLTOOL_SCHEMAS_RULE@ |
|---|
| 97 | INTLTOOL_SERVER_RULE = @INTLTOOL_SERVER_RULE@ |
|---|
| 98 | INTLTOOL_SHEET_RULE = @INTLTOOL_SHEET_RULE@ |
|---|
| 99 | INTLTOOL_SOUNDLIST_RULE = @INTLTOOL_SOUNDLIST_RULE@ |
|---|
| 100 | INTLTOOL_UI_RULE = @INTLTOOL_UI_RULE@ |
|---|
| 101 | INTLTOOL_UPDATE = @INTLTOOL_UPDATE@ |
|---|
| 102 | INTLTOOL_XML_RULE = @INTLTOOL_XML_RULE@ |
|---|
| 103 | LDFLAGS = @LDFLAGS@ |
|---|
| 104 | LIBGNOME_INFO2HTML = @LIBGNOME_INFO2HTML@ |
|---|
| 105 | LIBGNOME_MAN2HTML = @LIBGNOME_MAN2HTML@ |
|---|
| 106 | LIBTOOL = @LIBTOOL@ |
|---|
| 107 | LN_S = @LN_S@ |
|---|
| 108 | MAINT = @MAINT@ |
|---|
| 109 | MAKEINFO = @MAKEINFO@ |
|---|
| 110 | MKINSTALLDIRS = @MKINSTALLDIRS@ |
|---|
| 111 | OBJDUMP = @OBJDUMP@ |
|---|
| 112 | OBJEXT = @OBJEXT@ |
|---|
| 113 | ORBIT_CFLAGS = @ORBIT_CFLAGS@ |
|---|
| 114 | ORBIT_CONFIG = @ORBIT_CONFIG@ |
|---|
| 115 | ORBIT_IDL = @ORBIT_IDL@ |
|---|
| 116 | ORBIT_LIBS = @ORBIT_LIBS@ |
|---|
| 117 | PACKAGE = @PACKAGE@ |
|---|
| 118 | PKG_CONFIG = @PKG_CONFIG@ |
|---|
| 119 | POFILES = @POFILES@ |
|---|
| 120 | POPT_LIBS = @POPT_LIBS@ |
|---|
| 121 | POSUB = @POSUB@ |
|---|
| 122 | RANLIB = @RANLIB@ |
|---|
| 123 | STRIP = @STRIP@ |
|---|
| 124 | USE_NLS = @USE_NLS@ |
|---|
| 125 | VERSION = @VERSION@ |
|---|
| 126 | WARN_CFLAGS = @WARN_CFLAGS@ |
|---|
| 127 | YELP_IDL_INCLUDES = @YELP_IDL_INCLUDES@ |
|---|
| 128 | cxxflags_set = @cxxflags_set@ |
|---|
| 129 | yelplocaledir = @yelplocaledir@ |
|---|
| 130 | |
|---|
| 131 | SUBDIRS = src stylesheets po data |
|---|
| 132 | |
|---|
| 133 | DESKTOP_IN_FILES = yelp.desktop.in |
|---|
| 134 | DESKTOP_FILES = $(DESKTOP_IN_FILES:.desktop.in=.desktop) |
|---|
| 135 | |
|---|
| 136 | Applicationsdir = $(datadir)/applications |
|---|
| 137 | Applications_DATA = $(DESKTOP_FILES) |
|---|
| 138 | |
|---|
| 139 | yelpdatadir = $(datadir)/yelp |
|---|
| 140 | yelpdata_DATA = important_docs.xml |
|---|
| 141 | |
|---|
| 142 | EXTRA_DIST = \ |
|---|
| 143 | intltool-extract.in \ |
|---|
| 144 | intltool-merge.in \ |
|---|
| 145 | intltool-update.in \ |
|---|
| 146 | idl/GNOME_Yelp.idl \ |
|---|
| 147 | important_docs.xml \ |
|---|
| 148 | $(DESKTOP_IN_FILES) \ |
|---|
| 149 | $(DESKTOP_FILES) |
|---|
| 150 | |
|---|
| 151 | ACLOCAL_M4 = $(top_srcdir)/aclocal.m4 |
|---|
| 152 | mkinstalldirs = $(SHELL) $(top_srcdir)/mkinstalldirs |
|---|
| 153 | CONFIG_HEADER = config.h |
|---|
| 154 | CONFIG_CLEAN_FILES = |
|---|
| 155 | DATA = $(Applications_DATA) $(yelpdata_DATA) |
|---|
| 156 | |
|---|
| 157 | DIST_COMMON = README ./stamp-h.in AUTHORS COPYING ChangeLog INSTALL \ |
|---|
| 158 | Makefile.am Makefile.in NEWS TODO acconfig.h aclocal.m4 config.guess \ |
|---|
| 159 | config.h.in config.sub configure configure.in install-sh ltmain.sh \ |
|---|
| 160 | missing mkinstalldirs |
|---|
| 161 | |
|---|
| 162 | |
|---|
| 163 | DISTFILES = $(DIST_COMMON) $(SOURCES) $(HEADERS) $(TEXINFOS) $(EXTRA_DIST) |
|---|
| 164 | |
|---|
| 165 | TAR = gtar |
|---|
| 166 | GZIP_ENV = --best |
|---|
| 167 | all: all-redirect |
|---|
| 168 | .SUFFIXES: |
|---|
| 169 | $(srcdir)/Makefile.in: @MAINTAINER_MODE_TRUE@ Makefile.am $(top_srcdir)/configure.in $(ACLOCAL_M4) |
|---|
| 170 | cd $(top_srcdir) && $(AUTOMAKE) --gnu --include-deps Makefile |
|---|
| 171 | |
|---|
| 172 | Makefile: $(srcdir)/Makefile.in $(top_builddir)/config.status |
|---|
| 173 | cd $(top_builddir) \ |
|---|
| 174 | && CONFIG_FILES=$@ CONFIG_HEADERS= $(SHELL) ./config.status |
|---|
| 175 | |
|---|
| 176 | $(ACLOCAL_M4): @MAINTAINER_MODE_TRUE@ configure.in |
|---|
| 177 | cd $(srcdir) && $(ACLOCAL) |
|---|
| 178 | |
|---|
| 179 | config.status: $(srcdir)/configure $(CONFIG_STATUS_DEPENDENCIES) |
|---|
| 180 | $(SHELL) ./config.status --recheck |
|---|
| 181 | $(srcdir)/configure: @MAINTAINER_MODE_TRUE@$(srcdir)/configure.in $(ACLOCAL_M4) $(CONFIGURE_DEPENDENCIES) |
|---|
| 182 | cd $(srcdir) && $(AUTOCONF) |
|---|
| 183 | |
|---|
| 184 | config.h: stamp-h |
|---|
| 185 | @if test ! -f $@; then \ |
|---|
| 186 | rm -f stamp-h; \ |
|---|
| 187 | $(MAKE) stamp-h; \ |
|---|
| 188 | else :; fi |
|---|
| 189 | stamp-h: $(srcdir)/config.h.in $(top_builddir)/config.status |
|---|
| 190 | cd $(top_builddir) \ |
|---|
| 191 | && CONFIG_FILES= CONFIG_HEADERS=config.h \ |
|---|
| 192 | $(SHELL) ./config.status |
|---|
| 193 | @echo timestamp > stamp-h 2> /dev/null |
|---|
| 194 | $(srcdir)/config.h.in: @MAINTAINER_MODE_TRUE@$(srcdir)/stamp-h.in |
|---|
| 195 | @if test ! -f $@; then \ |
|---|
| 196 | rm -f $(srcdir)/stamp-h.in; \ |
|---|
| 197 | $(MAKE) $(srcdir)/stamp-h.in; \ |
|---|
| 198 | else :; fi |
|---|
| 199 | $(srcdir)/stamp-h.in: $(top_srcdir)/configure.in $(ACLOCAL_M4) acconfig.h |
|---|
| 200 | cd $(top_srcdir) && $(AUTOHEADER) |
|---|
| 201 | @echo timestamp > $(srcdir)/stamp-h.in 2> /dev/null |
|---|
| 202 | |
|---|
| 203 | mostlyclean-hdr: |
|---|
| 204 | |
|---|
| 205 | clean-hdr: |
|---|
| 206 | |
|---|
| 207 | distclean-hdr: |
|---|
| 208 | -rm -f config.h |
|---|
| 209 | |
|---|
| 210 | maintainer-clean-hdr: |
|---|
| 211 | |
|---|
| 212 | install-ApplicationsDATA: $(Applications_DATA) |
|---|
| 213 | @$(NORMAL_INSTALL) |
|---|
| 214 | $(mkinstalldirs) $(DESTDIR)$(Applicationsdir) |
|---|
| 215 | @list='$(Applications_DATA)'; for p in $$list; do \ |
|---|
| 216 | if test -f $(srcdir)/$$p; then \ |
|---|
| 217 | echo " $(INSTALL_DATA) $(srcdir)/$$p $(DESTDIR)$(Applicationsdir)/$$p"; \ |
|---|
| 218 | $(INSTALL_DATA) $(srcdir)/$$p $(DESTDIR)$(Applicationsdir)/$$p; \ |
|---|
| 219 | else if test -f $$p; then \ |
|---|
| 220 | echo " $(INSTALL_DATA) $$p $(DESTDIR)$(Applicationsdir)/$$p"; \ |
|---|
| 221 | $(INSTALL_DATA) $$p $(DESTDIR)$(Applicationsdir)/$$p; \ |
|---|
| 222 | fi; fi; \ |
|---|
| 223 | done |
|---|
| 224 | |
|---|
| 225 | uninstall-ApplicationsDATA: |
|---|
| 226 | @$(NORMAL_UNINSTALL) |
|---|
| 227 | list='$(Applications_DATA)'; for p in $$list; do \ |
|---|
| 228 | rm -f $(DESTDIR)$(Applicationsdir)/$$p; \ |
|---|
| 229 | done |
|---|
| 230 | |
|---|
| 231 | install-yelpdataDATA: $(yelpdata_DATA) |
|---|
| 232 | @$(NORMAL_INSTALL) |
|---|
| 233 | $(mkinstalldirs) $(DESTDIR)$(yelpdatadir) |
|---|
| 234 | @list='$(yelpdata_DATA)'; for p in $$list; do \ |
|---|
| 235 | if test -f $(srcdir)/$$p; then \ |
|---|
| 236 | echo " $(INSTALL_DATA) $(srcdir)/$$p $(DESTDIR)$(yelpdatadir)/$$p"; \ |
|---|
| 237 | $(INSTALL_DATA) $(srcdir)/$$p $(DESTDIR)$(yelpdatadir)/$$p; \ |
|---|
| 238 | else if test -f $$p; then \ |
|---|
| 239 | echo " $(INSTALL_DATA) $$p $(DESTDIR)$(yelpdatadir)/$$p"; \ |
|---|
| 240 | $(INSTALL_DATA) $$p $(DESTDIR)$(yelpdatadir)/$$p; \ |
|---|
| 241 | fi; fi; \ |
|---|
| 242 | done |
|---|
| 243 | |
|---|
| 244 | uninstall-yelpdataDATA: |
|---|
| 245 | @$(NORMAL_UNINSTALL) |
|---|
| 246 | list='$(yelpdata_DATA)'; for p in $$list; do \ |
|---|
| 247 | rm -f $(DESTDIR)$(yelpdatadir)/$$p; \ |
|---|
| 248 | done |
|---|
| 249 | |
|---|
| 250 | # This directory's subdirectories are mostly independent; you can cd |
|---|
| 251 | # into them and run `make' without going through this Makefile. |
|---|
| 252 | # To change the values of `make' variables: instead of editing Makefiles, |
|---|
| 253 | # (1) if the variable is set in `config.status', edit `config.status' |
|---|
| 254 | # (which will cause the Makefiles to be regenerated when you run `make'); |
|---|
| 255 | # (2) otherwise, pass the desired values on the `make' command line. |
|---|
| 256 | |
|---|
| 257 | @SET_MAKE@ |
|---|
| 258 | |
|---|
| 259 | all-recursive install-data-recursive install-exec-recursive \ |
|---|
| 260 | installdirs-recursive install-recursive uninstall-recursive \ |
|---|
| 261 | check-recursive installcheck-recursive info-recursive dvi-recursive: |
|---|
| 262 | @set fnord $(MAKEFLAGS); amf=$$2; \ |
|---|
| 263 | dot_seen=no; \ |
|---|
| 264 | target=`echo $@ | sed s/-recursive//`; \ |
|---|
| 265 | list='$(SUBDIRS)'; for subdir in $$list; do \ |
|---|
| 266 | echo "Making $$target in $$subdir"; \ |
|---|
| 267 | if test "$$subdir" = "."; then \ |
|---|
| 268 | dot_seen=yes; \ |
|---|
| 269 | local_target="$$target-am"; \ |
|---|
| 270 | else \ |
|---|
| 271 | local_target="$$target"; \ |
|---|
| 272 | fi; \ |
|---|
| 273 | (cd $$subdir && $(MAKE) $(AM_MAKEFLAGS) $$local_target) \ |
|---|
| 274 | || case "$$amf" in *=*) exit 1;; *k*) fail=yes;; *) exit 1;; esac; \ |
|---|
| 275 | done; \ |
|---|
| 276 | if test "$$dot_seen" = "no"; then \ |
|---|
| 277 | $(MAKE) $(AM_MAKEFLAGS) "$$target-am" || exit 1; \ |
|---|
| 278 | fi; test -z "$$fail" |
|---|
| 279 | |
|---|
| 280 | mostlyclean-recursive clean-recursive distclean-recursive \ |
|---|
| 281 | maintainer-clean-recursive: |
|---|
| 282 | @set fnord $(MAKEFLAGS); amf=$$2; \ |
|---|
| 283 | dot_seen=no; \ |
|---|
| 284 | rev=''; list='$(SUBDIRS)'; for subdir in $$list; do \ |
|---|
| 285 | rev="$$subdir $$rev"; \ |
|---|
| 286 | test "$$subdir" != "." || dot_seen=yes; \ |
|---|
| 287 | done; \ |
|---|
| 288 | test "$$dot_seen" = "no" && rev=". $$rev"; \ |
|---|
| 289 | target=`echo $@ | sed s/-recursive//`; \ |
|---|
| 290 | for subdir in $$rev; do \ |
|---|
| 291 | echo "Making $$target in $$subdir"; \ |
|---|
| 292 | if test "$$subdir" = "."; then \ |
|---|
| 293 | local_target="$$target-am"; \ |
|---|
| 294 | else \ |
|---|
| 295 | local_target="$$target"; \ |
|---|
| 296 | fi; \ |
|---|
| 297 | (cd $$subdir && $(MAKE) $(AM_MAKEFLAGS) $$local_target) \ |
|---|
| 298 | || case "$$amf" in *=*) exit 1;; *k*) fail=yes;; *) exit 1;; esac; \ |
|---|
| 299 | done && test -z "$$fail" |
|---|
| 300 | tags-recursive: |
|---|
| 301 | list='$(SUBDIRS)'; for subdir in $$list; do \ |
|---|
| 302 | test "$$subdir" = . || (cd $$subdir && $(MAKE) $(AM_MAKEFLAGS) tags); \ |
|---|
| 303 | done |
|---|
| 304 | |
|---|
| 305 | tags: TAGS |
|---|
| 306 | |
|---|
| 307 | ID: $(HEADERS) $(SOURCES) $(LISP) |
|---|
| 308 | list='$(SOURCES) $(HEADERS)'; \ |
|---|
| 309 | unique=`for i in $$list; do echo $$i; done | \ |
|---|
| 310 | awk ' { files[$$0] = 1; } \ |
|---|
| 311 | END { for (i in files) print i; }'`; \ |
|---|
| 312 | here=`pwd` && cd $(srcdir) \ |
|---|
| 313 | && mkid -f$$here/ID $$unique $(LISP) |
|---|
| 314 | |
|---|
| 315 | TAGS: tags-recursive $(HEADERS) $(SOURCES) config.h.in $(TAGS_DEPENDENCIES) $(LISP) |
|---|
| 316 | tags=; \ |
|---|
| 317 | here=`pwd`; \ |
|---|
| 318 | list='$(SUBDIRS)'; for subdir in $$list; do \ |
|---|
| 319 | if test "$$subdir" = .; then :; else \ |
|---|
| 320 | test -f $$subdir/TAGS && tags="$$tags -i $$here/$$subdir/TAGS"; \ |
|---|
| 321 | fi; \ |
|---|
| 322 | done; \ |
|---|
| 323 | list='$(SOURCES) $(HEADERS)'; \ |
|---|
| 324 | unique=`for i in $$list; do echo $$i; done | \ |
|---|
| 325 | awk ' { files[$$0] = 1; } \ |
|---|
| 326 | END { for (i in files) print i; }'`; \ |
|---|
| 327 | test -z "$(ETAGS_ARGS)config.h.in$$unique$(LISP)$$tags" \ |
|---|
| 328 | || (cd $(srcdir) && etags $(ETAGS_ARGS) $$tags config.h.in $$unique $(LISP) -o $$here/TAGS) |
|---|
| 329 | |
|---|
| 330 | mostlyclean-tags: |
|---|
| 331 | |
|---|
| 332 | clean-tags: |
|---|
| 333 | |
|---|
| 334 | distclean-tags: |
|---|
| 335 | -rm -f TAGS ID |
|---|
| 336 | |
|---|
| 337 | maintainer-clean-tags: |
|---|
| 338 | |
|---|
| 339 | distdir = $(PACKAGE)-$(VERSION) |
|---|
| 340 | top_distdir = $(distdir) |
|---|
| 341 | |
|---|
| 342 | # This target untars the dist file and tries a VPATH configuration. Then |
|---|
| 343 | # it guarantees that the distribution is self-contained by making another |
|---|
| 344 | # tarfile. |
|---|
| 345 | distcheck: dist |
|---|
| 346 | -rm -rf $(distdir) |
|---|
| 347 | GZIP=$(GZIP_ENV) $(TAR) zxf $(distdir).tar.gz |
|---|
| 348 | mkdir $(distdir)/=build |
|---|
| 349 | mkdir $(distdir)/=inst |
|---|
| 350 | dc_install_base=`cd $(distdir)/=inst && pwd`; \ |
|---|
| 351 | cd $(distdir)/=build \ |
|---|
| 352 | && ../configure --srcdir=.. --prefix=$$dc_install_base \ |
|---|
| 353 | && $(MAKE) $(AM_MAKEFLAGS) \ |
|---|
| 354 | && $(MAKE) $(AM_MAKEFLAGS) dvi \ |
|---|
| 355 | && $(MAKE) $(AM_MAKEFLAGS) check \ |
|---|
| 356 | && $(MAKE) $(AM_MAKEFLAGS) install \ |
|---|
| 357 | && $(MAKE) $(AM_MAKEFLAGS) installcheck \ |
|---|
| 358 | && $(MAKE) $(AM_MAKEFLAGS) dist |
|---|
| 359 | -rm -rf $(distdir) |
|---|
| 360 | @banner="$(distdir).tar.gz is ready for distribution"; \ |
|---|
| 361 | dashes=`echo "$$banner" | sed s/./=/g`; \ |
|---|
| 362 | echo "$$dashes"; \ |
|---|
| 363 | echo "$$banner"; \ |
|---|
| 364 | echo "$$dashes" |
|---|
| 365 | dist: distdir |
|---|
| 366 | -chmod -R a+r $(distdir) |
|---|
| 367 | GZIP=$(GZIP_ENV) $(TAR) chozf $(distdir).tar.gz $(distdir) |
|---|
| 368 | -rm -rf $(distdir) |
|---|
| 369 | dist-all: distdir |
|---|
| 370 | -chmod -R a+r $(distdir) |
|---|
| 371 | GZIP=$(GZIP_ENV) $(TAR) chozf $(distdir).tar.gz $(distdir) |
|---|
| 372 | -rm -rf $(distdir) |
|---|
| 373 | distdir: $(DISTFILES) |
|---|
| 374 | -rm -rf $(distdir) |
|---|
| 375 | mkdir $(distdir) |
|---|
| 376 | -chmod 777 $(distdir) |
|---|
| 377 | $(mkinstalldirs) $(distdir)/idl |
|---|
| 378 | @for file in $(DISTFILES); do \ |
|---|
| 379 | d=$(srcdir); \ |
|---|
| 380 | if test -d $$d/$$file; then \ |
|---|
| 381 | cp -pr $$d/$$file $(distdir)/$$file; \ |
|---|
| 382 | else \ |
|---|
| 383 | test -f $(distdir)/$$file \ |
|---|
| 384 | || ln $$d/$$file $(distdir)/$$file 2> /dev/null \ |
|---|
| 385 | || cp -p $$d/$$file $(distdir)/$$file || :; \ |
|---|
| 386 | fi; \ |
|---|
| 387 | done |
|---|
| 388 | for subdir in $(SUBDIRS); do \ |
|---|
| 389 | if test "$$subdir" = .; then :; else \ |
|---|
| 390 | test -d $(distdir)/$$subdir \ |
|---|
| 391 | || mkdir $(distdir)/$$subdir \ |
|---|
| 392 | || exit 1; \ |
|---|
| 393 | chmod 777 $(distdir)/$$subdir; \ |
|---|
| 394 | (cd $$subdir && $(MAKE) $(AM_MAKEFLAGS) top_distdir=../$(distdir) distdir=../$(distdir)/$$subdir distdir) \ |
|---|
| 395 | || exit 1; \ |
|---|
| 396 | fi; \ |
|---|
| 397 | done |
|---|
| 398 | info-am: |
|---|
| 399 | info: info-recursive |
|---|
| 400 | dvi-am: |
|---|
| 401 | dvi: dvi-recursive |
|---|
| 402 | check-am: all-am |
|---|
| 403 | check: check-recursive |
|---|
| 404 | installcheck-am: |
|---|
| 405 | installcheck: installcheck-recursive |
|---|
| 406 | all-recursive-am: config.h |
|---|
| 407 | $(MAKE) $(AM_MAKEFLAGS) all-recursive |
|---|
| 408 | |
|---|
| 409 | install-exec-am: |
|---|
| 410 | install-exec: install-exec-recursive |
|---|
| 411 | |
|---|
| 412 | install-data-am: install-ApplicationsDATA install-yelpdataDATA |
|---|
| 413 | install-data: install-data-recursive |
|---|
| 414 | |
|---|
| 415 | install-am: all-am |
|---|
| 416 | @$(MAKE) $(AM_MAKEFLAGS) install-exec-am install-data-am |
|---|
| 417 | install: install-recursive |
|---|
| 418 | uninstall-am: uninstall-ApplicationsDATA uninstall-yelpdataDATA |
|---|
| 419 | uninstall: uninstall-recursive |
|---|
| 420 | all-am: Makefile $(DATA) config.h |
|---|
| 421 | all-redirect: all-recursive-am |
|---|
| 422 | install-strip: |
|---|
| 423 | $(MAKE) $(AM_MAKEFLAGS) AM_INSTALL_PROGRAM_FLAGS=-s install |
|---|
| 424 | installdirs: installdirs-recursive |
|---|
| 425 | installdirs-am: |
|---|
| 426 | $(mkinstalldirs) $(DESTDIR)$(Applicationsdir) $(DESTDIR)$(yelpdatadir) |
|---|
| 427 | |
|---|
| 428 | |
|---|
| 429 | mostlyclean-generic: |
|---|
| 430 | |
|---|
| 431 | clean-generic: |
|---|
| 432 | |
|---|
| 433 | distclean-generic: |
|---|
| 434 | -rm -f Makefile $(CONFIG_CLEAN_FILES) |
|---|
| 435 | -rm -f config.cache config.log stamp-h stamp-h[0-9]* |
|---|
| 436 | |
|---|
| 437 | maintainer-clean-generic: |
|---|
| 438 | mostlyclean-am: mostlyclean-hdr mostlyclean-tags mostlyclean-generic |
|---|
| 439 | |
|---|
| 440 | mostlyclean: mostlyclean-recursive |
|---|
| 441 | |
|---|
| 442 | clean-am: clean-hdr clean-tags clean-generic mostlyclean-am |
|---|
| 443 | |
|---|
| 444 | clean: clean-recursive |
|---|
| 445 | |
|---|
| 446 | distclean-am: distclean-hdr distclean-tags distclean-generic clean-am |
|---|
| 447 | -rm -f libtool |
|---|
| 448 | |
|---|
| 449 | distclean: distclean-recursive |
|---|
| 450 | -rm -f config.status |
|---|
| 451 | |
|---|
| 452 | maintainer-clean-am: maintainer-clean-hdr maintainer-clean-tags \ |
|---|
| 453 | maintainer-clean-generic distclean-am |
|---|
| 454 | @echo "This command is intended for maintainers to use;" |
|---|
| 455 | @echo "it deletes files that may require special tools to rebuild." |
|---|
| 456 | |
|---|
| 457 | maintainer-clean: maintainer-clean-recursive |
|---|
| 458 | -rm -f config.status |
|---|
| 459 | |
|---|
| 460 | .PHONY: mostlyclean-hdr distclean-hdr clean-hdr maintainer-clean-hdr \ |
|---|
| 461 | uninstall-ApplicationsDATA install-ApplicationsDATA \ |
|---|
| 462 | uninstall-yelpdataDATA install-yelpdataDATA install-data-recursive \ |
|---|
| 463 | uninstall-data-recursive install-exec-recursive \ |
|---|
| 464 | uninstall-exec-recursive installdirs-recursive uninstalldirs-recursive \ |
|---|
| 465 | all-recursive check-recursive installcheck-recursive info-recursive \ |
|---|
| 466 | dvi-recursive mostlyclean-recursive distclean-recursive clean-recursive \ |
|---|
| 467 | maintainer-clean-recursive tags tags-recursive mostlyclean-tags \ |
|---|
| 468 | distclean-tags clean-tags maintainer-clean-tags distdir info-am info \ |
|---|
| 469 | dvi-am dvi check check-am installcheck-am installcheck all-recursive-am \ |
|---|
| 470 | install-exec-am install-exec install-data-am install-data install-am \ |
|---|
| 471 | install uninstall-am uninstall all-redirect all-am all installdirs-am \ |
|---|
| 472 | installdirs mostlyclean-generic distclean-generic clean-generic \ |
|---|
| 473 | maintainer-clean-generic clean mostlyclean distclean maintainer-clean |
|---|
| 474 | |
|---|
| 475 | |
|---|
| 476 | @INTLTOOL_DESKTOP_RULE@ |
|---|
| 477 | |
|---|
| 478 | # Tell versions [3.59,3.63) of GNU make to not export all variables. |
|---|
| 479 | # Otherwise a system limit (for SysV at least) may be exceeded. |
|---|
| 480 | .NOEXPORT: |
|---|
